3M™ Three Conductor Termination Kits Qt-Iii 7600 Series 7686-S-8-3-Rjs
- Part Number 7686-S-8-3-RJS
- 3M ID 7100165382
- UPC 00051128595312
Details
Highlights
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for outdoor applications and cabinet-mount installations
- Termination has 1.53 to 1.81-in insulation O.D
- Accommodates wire sizes of 500 to 750 kcmil at 35kV
- Integrated design allows for easier installation, while sealing compounds provide constant radial pressure
- Withstands voltages of 5 to 35kV and is 200 kV BIL-rated
- Includes an 8-skirt, 3-phase, cold shrink termination
- JIS, IEC and AEIC Approved
3M™ Cold Shrink QT-III 7600-S-3RJS Series Termination Kit includes a skirted, 3-phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric-constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.
3M™ Cold Shrink QT-III 7600-S-3RJS Series Termination Kit is designed for terminating medium voltage, 3-conductor cables with or without internal ground wires. The UV stable, track-resistant construction makes the termination suitable for outdoor applications. The lower surface stress, high dielectric-constant material offers an optimized BIL performance while ensuring a leak-proof, compact fit. JIS, IEC and AEIC Approved.
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
