3M™ NVH Dampening Material, 04274, 200 mL Cartridge, 6 per case
- Part Number 04274
- 3M ID 7100004038
- UPC 00051131042742
Details
Highlights
- Soft, sturdy, non-shrink formula stops vibration and reduces noise between panels, braces and intrusion beams
- Provides 60-minute worktimes to help ensure accurate installation
- Excellent for thin gaps where foam cannot be used or easily replaced
- Can be applied up to 1” thick to vertical and overhead surfaces with minimal drip
- Non-solvent formula won’t shrink after installation
3M™ NVH Dampening Material is a flexible urethane adhesive-type material for replacing and re-installing factory NVH sealants and foams. This two-part material can be used to coat existing foams before reinstallation of outer body panels, or to fill thin gaps where foam cannot be used. Great for overhead or vertical surfaces, it cures to a flexible yet firm state and affords a 60-minute worktime.
This side-by-side two-part material comes together to coat existing foams before reinstallation of outer body panels
For collision repair jobs where minimizing NVH (noise, vibration and harshness) is important, our 3M™ NVH Dampening Material is an excellent complement to flexible or pillar foams and factory dampening materials. This two-component material applies smoothly and easily between roof skins and roof bows, door skins, door intrusion beams or other areas using non-structural type foam materials. Unlike many seam sealers, this material goes in soft yet remains very sturdy, allowing for expansion and contraction of automotive sheet metal. Yet it has no solvents so it won't shrink and pull the metal in after installation. It minimizes application time and cleanup — it applies right from the cartridge without added mixing time, and provides up to a 1" thick layer of flexible material on vertical and overhead surfaces.
3M™ NVH Dampening Material is especially useful for thin openings such as truck door skins, where installing new foam can become time-consuming — simply coat the existing integrally bonded foam instead of replacing it. Or, install dampening material by itself where foam cannot be used.
The Science of Better Collision Repair from 3M
3M has long been developing new ways to apply science to the lives of professionals in a range of industries including collision repair. Our 3M™ NVH Dampening Material is a great example — decades of knowledge in a product that delivers better results in time and quality even for the most specific jobs. Very simply, it's the right product at the right time for applying foams and other NVH products. So you can get the most value and customer satisfaction from your entire operation.
Sound Deadening and NVH (PDF, 709.26 Kb)
Suggested applications
- Reduces noise and vibration between panels
- Roof skins, roof bows, door skins, door intrusion beams or other areas
Typical properties
Resources
Reviews
Connect with us. We’re here to help.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
