3M™ Trizact™ Hookit™ Foam Disc 30662, P5000, 6 in, 15 Discs/Carton, 4 Cartons/Case
- Part Number 30662
- 3M Product Number 443SA
- 3M ID 7100003887
- UPC 00051131306622
Details
Highlights
- Reduce the need for compounding with 5000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs in your paint finishing
- These 5000-grade foam discs are used as the next step after 3M™ Trizact™ 3000-grade sanding to further reduce the time required for compounding
- Used damp, they refine inconsistent sand scratches with less loading than dry sanding
- 3M™ Trizact™ abrasives have unique three-dimensional abrasive structures which are distributed across the abrasive surface. As the structures wear, fresh sharp mineral is exposed delivering consistent finishes, longer disc life and helping reduce material costs
- Allows technicians to refine paint scratches using a lighter dual-action sander instead of a heavier polisher
- Compared to traditional buffing, using 3M™ Trizact™ Abrasives for removing sand scratches can reduce the possibility of heavy swirl marks, burn through, and other defects caused by more aggressive processes
- Available in 3-, 5-, and 6-inch diameter discs as well as 2 3/4 x 5 1/2-inch sheets
Spend less time compounding and enjoy less risk of defects by using 5000-grade 3M™ Trizact™ Hookit™ Foam Abrasives. Use these discs as the next step to refine 3000-grade scratches, to reduce compounding. 3M™ Trizact™ abrasives are engineered for consistent cut and long life.
Technicians can spend less time managing a heavy polisher while delivering a fine, consistent finish by using 5000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs for paint finishing. Use 3M™ Trizact™ 5000 foam discs for refining 3000-grade sand scratches on painted surfaces and clearcoats. Used damp, they deliver the anti-loading benefits of wet sanding without the productivity-reducing hydroplaning, which can happen when power sanding on overly wet surfaces. The foam backing provides plenty of control and consistent contact with the surface – great for preserving orange peel. Can be used with a soft interface pad for added conformability over curved surfaces. Their patented three-dimensional abrasive structures wear to reveal fresh, sharp mineral - continuously refreshing the abrasive so it delivers a fast cut and long life. When used with other 3M™ Trizact™ abrasives and a 3M™ Perfect-It™ Paint Finishing system, they can reduce overall polishing time.
Suggested applications
- Use Trizact™ 5000 Grit Foam Disc for removing P3000 grade sand scratches on painted surfaces prior to use of 3M™ Perfect-It™ Polishing System
- Use with 3M™ Hookit™ Disc Pad (PN 05551) and 3M Hookit ™ Soft Interface Pad (PN 05777)
Typical properties
Resources
Reviews
Connect with us. We’re here to help.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
