3M™ MSP Sprayable Seam Sealer 08374, Gray, 10.5 FL OZ Cartridge 6/Case
- Part Number 8374
- 3M ID 7000148239
- UPC 00051135083741
Details
Highlights
- Single component moisture-curing MSP seam sealer offers convenience and quality
- Sealer is formulated for automotive body joints
- Versatile application methods allow caulking or spraying
- Excellent adhesion works well with primed surfaces
- Fast curing allows for immediate painting
3M™ MSP Sprayable Seam Sealer is a gray high-performance, general-purpose seam sealer that can be caulked or sprayed. This convenient, easy-to-apply sealer adheres well to all primed surfaces, except acrylic lacquer. It offers the convenience of allowing for painting almost immediately after being applied.
Bead can be used for general purpose seams, including door skins, rocker panels, rear body panels and trunks
The 3M Sprayable Seam Sealer Applicator Gun allows for easy adjustment
3M™ MSP Sprayable Seam Sealer is a high-solids, moisture-curing seam sealer that can be caulked or sprayed as a sealer or a sound deadening coating. Our sealer is non-shrinking, non-cracking and fast curing. It dries tack free in 30 minutes and allows for immediate painting.
Recommended Applicator
If you are in need of an applicator, we recommend 3M Sprayable Seam Sealer Applicator Gun, part number 08400 (sold separately). This applicator gun allows for easy adjustment for a variability of spray patterns.
A Versatile Sealer with Many Uses
- Bead can be used for general purpose automotive seams, including door skins, rocker panels, rear body panels, trunk seams, floor pans, etc.
- Sprayed seam can be used for trunk seams, quarter panels, any other OEM sprayed seam replacement.
- Sprayed coating can be used inside door skins, inside body panels, as a coarse textured coating for undercarriages or any area where a sound deadening coating is needed.
Our seam sealer has been formulated to offer numerous benefits for automotive technicians. With this sealer, you will be able to produce a bead, sprayed seam or a sprayed coating appearance. Multiple appearances can be achieved with one gun and sealer combination, saving the cost and space of carrying multiple products. Excellent adhesion to primed metal and aluminum means there is more consistent bond reliability, resulting in fewer comebacks for seam sealer failure. Fast cure reduces the waiting time for painting. There are no problems with alcohol-containing solvents.
Suggested applications
- General purpose automotive seams
- Etc
- Door skins
- Rocker panels
- Rear body panels
- Trunk seams
- Floor pans
- Quarter panels
- Inside door skins
- Inside body panels
Typical properties
Resources
Reviews
Connect with us. We’re here to help.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
