3M™ Cold Shrink QT-III Three Conductor Cable Termination Kit 7623-T-95-3W, 15 kV, 0.70-0.92 in Cable Insul. O.D., 3/kit
- Part Number 7623-T-95-3W
- 3M ID 7100009591
- UPC 00054007047339
Details
Highlights
- Provides a void-free seal to tape shield, wire shield and UniShield® power cables
- High dielectric-constant material regulates the distribution of electric field stress
- Suitable for indoor applications and cabinet-mount installations
- Termination has 0.70 to 0.92-in insulation O.D
- Accommodates wire sizes of 4/0 AWG to 400 kcmil at 5kV, 3/0 AWG to 350 kcmil at 8 kV, 35 to 95 mm² at 15kV
- Integrated design allows for easier installation in limited spaces, while sealing compounds provide constant radial pressure
- Withstands voltages of 5 to 35kV and is 95kV BIL-rated
- Includes a non-skirted, 3-phase, cold shrink termination
- JIS, IEC and AEIC Approved
3M™ Cold Shrink QT-III 7600-T-3W Series Termination Kit includes a non-skirted, 3-phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric-constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.
Conductor Size Range for
· 5 kV: 4/0 AWG-400 kcmil
· 8 kV: 3/0 AWG-350 kcmil
Typical properties
Resources
Legal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
