3M™ Half Facepiece Respirator Assembly 6391/07003(AAD), Large, with 3M™ Particulate Filters 2091/07000(AAD), P100 24 EA/Case
- Part Number 07003
- 3M Product Number 6391
- 3M ID 7000126164
- UPC 50051131070030
Details
Highlights
- Assembly includes Half Facepiece Respirator and Particulate Filter 2091 P100
- Half facepiece design combines comfort and convenience
- Remarkably comfortable, soft, lightweight facepiece and easy-to-adjust head straps
- Removable filters can be replaced with NIOSH approved 3M filters and cartridges
- NIOSH approved for environments containing certain oil and non-oil based particles
NIOSH approved for environments containing certain oil and non-oil based particles.
This assembly includes a 3M™ 6000 Series Half Facepiece Reusable Respirator and two 3M™ 2091 P100 Particulate Filters. This assembly is NIOSH approved for environments containing certain oil and non-oil based particles. When properly fitted, this respirator helps provide protection in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead asbestos, cadmium, arsenic, and MDA at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator is remarkably comfortable, soft, and lightweight, and features easy-to-adjust head straps. The swept-back design of the cartridges helps improve balance and visibility. Easy-to-adjust head straps allow for a customized fit to the user. When used to capacity, the included cartridges can be removed and replaced with new P100 Filter/Cartridges or other NIOSH approved 3M™ 2000 or 2200 Series Filters or 6000 Series Cartridges. The respirator can also be disassembled, cleaned, and reused, extending the life and cost effectiveness of the product. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series is NIOSH approved for negative air purifying and positive pressure dual airline applications. The respirator comes with a P100 filter, which is replaceable. This half facepiece respirator may be used with any of these replacements: 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable
Typical properties
Resources
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.
