3M™ Scotchlok™ Adapter, Non-Insulated Double Male-Female, MA250DMMFK, 500/Case

Part Number MA250DMMFK, 3M ID 7000005897, UPC 00054007022732

1 of 1

Hover to zoom

Interconnects two connectors that are already attached to wires
Features a non-insulated, butted-seam barrel
Perfect for various wire tapping and splicing applications
Mates with 0.25-in wide female and male tab

View all details

View Legal Disclaimer

For industrial/occupational use only. Not for consumer sale or use.

Specifications

Attribute Name	Value
Barrel Style	Butted
Brand	Scotchlok™
Connection Width (Imperial)	0.25 in
Connection Width (Metric)	6.35 mm
CSA File Number	LR22190
Disconnect Type	Female\|Male
Fastener Orientation	Double Male-Female
Insulation Material	Non-insulated
Material	Plastic
Mates with Female & Male Tab Width (W')	0.25 Inch
Maximum Insulation Outer Diameter (Metric)	3.7 mm
Maximum Insulation Outside Diameter	0.145 in
Maximum Operating Temperature (Celsius)	250 Degree Celsius
Maximum Operating Temperature (Fahrenheit)	482 Degree Fahrenheit
Maximum Recommended Voltage Rating	606 V
Maximum Voltage Rating	600 to 1000 V
National Stock Number	5940002760678
Overall Length (Imperial)	0.76 in
Packaging	500 per bulk box
Pad Width	0.25 in
Product Type	Connector
RoHS 2011/65/EU Compliant	Yes
RoHS EU Comments	RoHS 2011/65/EU compliant without exemption
Terminal Style	Adapter
Terminal Type	Disconnect
UL File Number	E70512
Units per Case	500

Details

Interconnects two connectors that are already attached to wires
Features a non-insulated, butted-seam barrel
Perfect for various wire tapping and splicing applications
Mates with 0.25-in wide female and male tab
Made of durable brass for good conductivity and tin-plated for corrosion resistance
Withstands a maximum temperature of 347 degrees F (175 degrees C) for bare terminals
600V-rated for building wire and 1000V for signs, fixtures or luminaires
UL Listed, CSA Certified and RoHS 2011/65/EU Compliant

3M™ Scotchlok™ Non-Insulated Double Male-Female Adapters interconnects 2 disconnects that are already attached to wires. The adapter withstands a maximum temperature of 347 degrees F (175 degrees C). Durable brass construction offers good conductivity and a tin-plated finish resists corrosion.

3M™ Scotchlok™ Non-Insulated Double Male-Female Adapter has a non-insulated, butted-seam barrel. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.

Resources

Catalogs

3M™ Wire Terminals, 2013 Product Catalog (PDF, 17.1MB)

Data Sheets

3M™ Scotchlok™ Terminals MA250DMFM/MA250DMMF (PDF, 29.9KB)

Product Selection Guides

Regulatory Material

EMD Shelf Life Statement (PDF, 90.3KB)

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.