3M™ Performance Spray Gun H/O Conversion Pack 26837, 4 Each/Case
- 3M ID 7100244430
- UPC 00051131268371
Details
Highlights
- Upgrades 3M™ Performance Spray Gun to spray heavy, thick coatings using 3M™ PPS™ Series 2.0 H/O pressure cups
- Provides excellent application control of heavy or texture coatings
- Easy-to-install kit adds a port for connecting the pressure cup’s air supply tube to the gun body
- Conversion adapter allows the gun to be used with 13.5- and 28-ounce capacity 3M™ PPS™ Series 2.0 H/O Pressure Cups
- Simple two-screw installation
Get more application control of heavy or texture coatings with the 3M™ Performance Spray Gun H/O Conversion Pack for the 3M™ Performance Spray Gun. When used with a PPS™ Series 2.0 Type H/O Pressure Cup, this upgrade lets technicians spray thick, high-viscosity coatings with better control of texture, pattern size, and delivery rate than aerosol cans and Schutz guns.
This easy-to-install H/O Conversion Pack adds an air-pressure port to our 3M™ Performance Spray Gun which is required to support 3M™ PPS™ Series 2.0 Type H/O Pressure Cups – delivering high-viscosity coatings with better control of texture, pattern size, and delivery rate than aerosol cans and Body Schutz guns.
Cleanup is simple. Simply discard the lid and liner or use the sealing plug to seal and protect the coating for later use. With quick-change replaceable atomizing, coatings never pass through the body of the spray gun. Twist the locking collar, remove the atomizing head, and wipe the needle clean.
Control valve allows user to turn off pressure feed for feed or traditional gravity cup applications.
Our 3M™ PPS™ Series 2.0 Type H/O Pressure Cup comes in two sizes, 13.5-ounce Midi and 28-ounce Large. They use air pressure between the hard cup walls and the collapsible 3M™ PPS™ liner to make high-viscosity fluids flow more smoothly and atomize more completely. Like all PPS, when the spraying is done, the liner can be thrown away and the atomizing head either replaced or cleaned for the next use. Uses 3M™ Performance Gravity Atomizing Heads.
Typical properties
Similar products
| Application | Cavity Wax application, Coating Application, Coating spraying, Manual Spray Coating, Paint Application, Painting, Sealing, Spraying paint, Tools & Accessories | |||
| Brands | 3M™ | |||
| Case Quantity | 4.0 per Case | |||
| Product Type | Air Assembly | |||
| Smallest Saleable Unit | Each |
3M™ Performance Spray Gun H/O Conversion Pack 26837, 4 Each/Case
3M™ PPS™ Series 2.0 Type H/O Pressure Cup
3M™ Performance Pressure HVLP Atomizing Head Refill Kit
3M™ Performance Pressure HVLP Atomizing Head Refill Kit, 26830, Variety Kit, 5 kits per caseFor industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
