3M™ Performance Spray Gun Ball Valve 26839, 4/Case

  • 3M ID 7100228103
  • UPC 00051131268395

Ball valve lets the painter stop fluid flow to spray gun

Attaches between whip hose and supply hose in a pressure feed configuration

Seals are compatible with both solvent-based and waterborne coatings

View more details

Details

Highlights
  • Ball valve lets the painter stop fluid flow to spray gun
  • Attaches between whip hose and supply hose in a pressure feed configuration
  • Seals are compatible with both solvent-based and waterborne coatings
  • Allows for spray gun removal or nozzle replacement without disabling the pressure source

3M™ Performance Spray Gun Ball Valve is an accessory for the 3M™ Performance Spray Gun System configured as a pressure feed sprayer. The valve gives the spray gun operator the ability to stop the flow of paint from the pressure source (pot or pump) at the spray gun end of the supply hose. Recommended for use when the painter does not have easy access to the pressure source. Light and easy to use.

The addition of a 3M™ Performance Spray Gun Ball Valve allows a painter to quickly stop flow of liquid to the 3M™ Performance Spray Gun when the spray gun is set up as a pressure feed sprayer. This valve is recommended whenever the painter cannot easily access the pressure source (e.g. on a ladder or a long distance away).

The lightweight valve is compatible with both waterborne and solvent-based coatings. It attaches to the whip hose at the bottom end of the spray gun handle. Valve has one male and one female threaded fitting.

The quarter-turn handle aligns parallel to the hose when it is open, perpendicular when it closed.

Use with the 3M™ Performance Spray Gun, an innovative solution designed with the industrial painter in mind. Made from an impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding industrial conditions. Its versatile design allows painters to spray from a pressurized source or a gravity cup, and replaceable atomizing heads allow you to spray a full range of coatings while delivering like-new performance with every new nozzle.

Typical properties

Resources

Reviews

Similar products

Air Consumption (Imperial) 13 scfm
Air Consumption (Metric) 368.12 L/min
Application Coating Application, Coating spraying, Manual Spray Coating, Paint Application
Brands 3M™
Case Quantity 4.0 per Case
Material Aluminum
Nozzle Diameter (Imperial) 1.25 in
Nozzle Diameter (Metric) 33 mm
Operating Pressure (Imperial) 145.0 psi
Operating Pressure (Metric) 9.9974 bar
Product Type Valve

Related Products

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.