3M™ Wire-Pulling Lubricant WLX
- | Select product options for IDs.
Details
Highlights
- Gray, wax-based emulsion
- Low coefficient of friction lessens the chance of cable jacket damage
- Ideal for hot temperatures and wet weather applications
- Temperature range of 10 to 194 degrees F (-12 to 90 degrees C)
3M™ Wire Pulling Lubricant Wax WLX is a gray, wax based emulsion that has excellent lubricating properties for smooth, low tension wire and cable pulling. This wax wipes off the cable quickly and cleanly before terminating or splicing. The lubricant has a low coefficient of friction, which lessens the chance of cable jacket damage from high pulling forces.
3M™ Wire Pulling Lubricant Wax WLX is a thick, consistent lubricant that does not liquefy or separate with hot aging. It scoops and applies easily to wire and cable without runs or drips in hot temperatures, and it will not evaporate too soon after pulls. The lubricant's low coefficient of friction lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the preferred choice for wet weather applications.
Typical properties
Resources
Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
