3M™ Scotchlok™ Vinyl Insulated with Insulation Grip Female Disconnects

Part Number MVG24-110/32DFX, 3M ID 7100165324, UPC 10051128589981

1 of 1

Hover to zoom

Dents and rolled edges of this female disconnect terminal offer excellent holding force
Allows for quick and easy disconnect of wires
Mates with 0.187-in wide male tab
Made of durable brass for good conductivity and has corrosion-resistant tin plating

View all details

For industrial/occupational use only. Not for consumer sale or use.

Specifications

Attribute Name	Value
Barrel Style	Butted
Brand	Scotchlok™
Connection Width (Imperial)	0.11 in
Connection Width (Metric)	2.794 mm
Disconnect Type	Female
Fastener Orientation	Female
Insulation Material	Vinyl with Insulation Grip
Mates with Female Width	0.110 Inch
Mates with Male Tab Width (W')	0.110 Inch
Maximum Conductor Size (Imperial)	24 AWG
Maximum Conductor Size (Metric)	.25 mm²
Maximum Insulation Outer Diameter (Imperial)	0.093 in
Minimum Conductor Size (Imperial)	26 AWG
Minimum Conductor Size (Metric)	.14 mm²
Minimum Order Quantity	100
Overall Length (Imperial)	0.63 in
Packaging	100 per bottle
RoHS 2011/65/EU Compliant	Yes
RoHS EU Comments	RoHS 2011/65/EU compliant without exemption
Solution for	Wireless Network: Infrastructure Accessories
Tab Width	0.187
Terminal Style	Standard
Terminal Type	Disconnect
Units per Case	500

Details

Dents and rolled edges of this female disconnect terminal offer excellent holding force
Allows for quick and easy disconnect of wires
Mates with 0.187-in wide male tab
Made of durable brass for good conductivity and has corrosion-resistant tin plating
Withstands a temperature range of -40 to 221 degrees F (-40 to 105 degrees C)
Rated 600V for building wire and 1000V for signs, fixtures or luminaires
UL Listed, CSA Certified and RoHS 2011/65/EU Compliant

3M™ Scotchlok™ Vinyl Insulated with Insulation Grip Female Disconnect has dents and rolled edges to offer superior holding force while allowing for quick and easy disconnect. The terminal has a vinyl-insulated, butted-seam barrel and withstands temperatures of -40 to 221 degrees F (-40 to 105 degrees C). Its durable brass construction offers good conductivity and a tin-plated finish resists corrosion.

3M™ Scotchlok™ Vinyl Insulated with Insulation Grip Female Disconnect attaches to the mating part with a tongue that slips over the male tab. It has a butted-seam barrel that is covered by a funnel-designed, rigid-molded, polyvinyl chloride sleeve which serves to guide the wire into position. The polyvinyl chloride sleeve provides electrical contacts and mechanical stress relief at the point of insulation. The vinyl-sleeve insulation is abrasion-resistant and flared to ensure easy crimping. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.

Resources

Catalogs

3M™ Wire Terminals, 2013 Product Catalog (PDF, 17.1MB)

Regulatory Material

EMD Shelf Life Statement (PDF, 90.3KB)

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.