3M™ Scotchlok™ Insulation Displacement Connector 901 is an Inline Bullet Receptacle that electrically connects to a run wire mid span and allows for a tap wire to be connected with a 0.156" male bullet without cutting or stripping the wire.
3M™ Scotchlok™ Insulation Displacement Connector 901 Inline Bullet Receptacle is suitable for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems and automotive/boat/RV wiring. The connector insulation is manufactured from polypropylene. It is 32V rated and withstands temperatures of 194 degrees F (90 degrees C). RoHS 2011/65/EU Compliant.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.