3M™ Scotchlok™ IDC Connector 801

Products
  • Blue, polypropylene-insulated connector is suitable for tap or parallel splicing
  • Suitable for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems and automotive/boat/RV wiring
  • Accommodates 18 to 16 AWG solid/stranded or 14 AWG stranded
  • UL Listed and RoHS 2011/65/EU Compliant
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Conductor Sizes (Imperial)
Conductor_Sizes
Products Available
Available options:
 Conductor Sizes (Imperial)
All Options
Close
Specifications
Attribute Name
Value
Brand
Scotchlok™
Color Family
Blue
Conductor Sizes (Imperial)
14 AWG (Stranded), 16 AWG, 18 AWG
Conductor Sizes (Metric)
1 mm², 1.5 mm², 2.5 mm² (Stranded)
Connection Type
Double Run or Tap
Connector Style
Insulation Displacement
Flame Retardant
Yes
Insulation Material
Polypropylene
Material
Insulator: FR Polypropylene, U-contact: Tin-plated Brass, Plastic
Maximum Conductor Size (Imperial)
14 AWG (Stranded), 16 AWG
Maximum Conductor Size (Metric)
1.5 mm², 2.5 mm² (Stranded)
Maximum Operating Temperature (Celsius)
105 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
221 Degree Fahrenheit
Maximum Recommended Voltage Rating
600 V
Minimum Conductor Size (Imperial)
18 AWG
Minimum Conductor Size (Metric)
1 mm²
Moisture Resistant
No
Package Quantity
50
Packaging
Pouch
Product Color
Blue
Product Type
Connector
Recommended Crimping Tool
E-9BM or 9 in. Linemans Pliers
RoHS 2011/65/EU Compliant
Yes
RoHS EU Comments
RoHS 2011/65/EU compliant without exemption
Run Maximum Insulation Outer Diameter (Imperial)
0.145 in
Run Maximum Insulation Outer Diameter (Metric)
3.7 mm
Tap Maximum Insulation Outer Diameter (Imperial)
0.145 in
Tap Maximum Insulation Outer Diameter (Metric)
3.7 mm
TDS Required
Yes
UL File Number
E23438
Units per Case
1000
Voltage Application
Low Voltage
Details
  • Blue, polypropylene-insulated connector is suitable for tap or parallel splicing
  • Suitable for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems and automotive/boat/RV wiring
  • Accommodates 18 to 16 AWG solid/stranded or 14 AWG stranded
  • UL Listed and RoHS 2011/65/EU Compliant

3M™ Scotchlok™ Insulation Displacement Connector 801 is a double run or tap connector for tap or parallel splicing. It is suitable for general purpose electrical connections on an auto, boat, van or trailer. Polypropylene insulated, self stripping and flame retardant.

3M™ Scotchlok™ Insulation Displacement Connector 801 is 600V rated for building wire and 1000V rated for signs, fixtures and luminaires. It withstands temperatures of 221 degrees F (105 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.