3M™ Scotchlok™ IDC Connector 564

Part Number 564-BULK3M ID 7000005870UPC 00054007061182
  • Beige polypropylene-insulated connector for parallel splicing
  • Suitable for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems and automotive/boat/RV wiring
  • Accommodates 18 to 14 AWG solid/stranded (tap) and 12 to 10 AWG solid/stranded (run)
  • UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
Scotchlok™
Color Family
White
Conductor Sizes (Imperial)
14 AWG, 18 AWG
Conductor Sizes (Metric)
1 mm², 2.5 mm²
Connection Type
Double Run or Tap
Connector Style
Insulation Displacement
Division
ElectricalMarketsDivision
Family
IDC for Electrical Applications
Flame Retardant
No
Insulation Material
Polypropylene
Insulation Outer Diameter (Imperial)
0.145 in
Material
Plastic
Maximum Conductor Size (Imperial)
14 AWG
Maximum Conductor Size (Metric)
2.5 mm²
Maximum Operating Temperature (Celsius)
90 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
194 Degree Fahrenheit
Maximum Recommended Voltage Rating
32 V
Minimum Conductor Size (Imperial)
18 AWG
Minimum Conductor Size (Metric)
1 mm²
Moisture Resistant
No
Packaging
Bulk
Pad Width
0.25 in
Product Color
White
Product Type
Double Run
Recommended Crimping Tool
E-9BM or 9 in. Linemans Pliers
RoHS 2011/65/EU Compliant
Yes
RoHS EU Comments
RoHS 2011/65/EU compliant without exemption
Run Maximum Insulation Outer Diameter (Imperial)
0.145 in
Run Maximum Insulation Outer Diameter (Metric)
3.7 mm
Tap Maximum Insulation Outer Diameter (Imperial)
0.145 in
Tap Maximum Insulation Outer Diameter (Metric)
3.7 mm
Units per Case
500
Voltage Application
Low Voltage
Wire Connector Type
IDC Connectors
Details
  • Beige polypropylene-insulated connector for parallel splicing
  • Suitable for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems and automotive/boat/RV wiring
  • Accommodates 18 to 14 AWG solid/stranded (tap) and 12 to 10 AWG solid/stranded (run)
  • UL Listed, CSA Certified and RoHS 2011/65/EU Compliant

3M™ Scotchlok™ Insulation Displacement Connector 564 is a double run connector for parallel splicing. It electrically connects two run (through) wires while insulating the connection. Polypropylene insulated and self stripping.

3M™ Scotchlok™ Insulation Displacement Connector 564 is rated for 32V applications. It withstands temperatures of 194 degrees F (90 degrees C). RoHS 2011/65/EU Compliant.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.