3M™ Charge-Collection Solar Tape consists of a 28 g ( 1-oz) tin-plated deadsoft copper foil backing and an electrically conductive, pressure-sensitive adhesive. This high-temperature adhesive is ideal for use in thin film solar applications requiring x, y and z-axis conductivity.
The 3M™ Charge-Collection Solar Tape 3007 is designed for use as a charge collector or bus within thin-film solar modules. The tape can be applied at high speeds using automation equipment. Since there is no soldering of connections or curing required (as with liquid conductive adhesives) they allow for high productivity during panel manufacturing.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.