3M™ Heat Shrink Tubing EPS-400
- | Select product options for IDs.
Details
Highlights
- Dual-wall construction provides abrasion resistance and moisture-seal protection
- Offers the advantage of integral, adhesive-lined construction
- Offers protection for sealing voids in multiple wire bundles for automotive and marine applications
- Made of semi-rigid polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant tubing is rated for 600V applications
- UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
3M™ Heat Shrink Tubing EPS-400 is a dual wall tubing provides the advantage of integral, adhesive lined construction. This flame retardant tubing with a 4:1 shrink ratio offers insulation for 600V rated applications. The semi rigid polyolefin construction has an internal layer of thermoplastic adhesive which offers moisture seal protection in automotive and marine applications.
3M™ Heat Shrink Tubing EPS-400 is color coded for quick and easy identification of the wire. It provides a skintight fit and strain relief protection for electronic components, truck wire splices, wire bundles and harness breakouts. This flame retardant tubing has a heat shrinkable outer wall that is cross linked for abrasion resistance. The inner adhesive helps to maintain high flow and good adhesion characteristics. When the tubing cools down, it forms a permanent, water resistant barrier. It withstands temperatures of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical properties
Resources
Similar products
| Inner Diameter After Shrink (Metric) | 1.52 mm, 2.03 mm, 2.67 mm, 2.86 mm, 4.45 mm | |||
| Maximum Operating Temperature (Fahrenheit) | 230 ℉, 275 ℉ | |||
| Inner Diameter Before Shrink (Metric) | 7.62 mm, 8.89 mm, 11.43 mm, 17.78 mm | |||
| Maximum Operating Temperature (Celsius) | 110 ℃ | |||
| Inner Diameter After Shrink (Imperial) | 0.06 in, 0.08 in, 0.105 in, 0.113 in, 0.175 in, 0.8 in | |||
| Inner Diameter Before Shrink (Imperial) | 0.3 in, 0.35 in, 0.45 in, 0.7 in |
3M™ Heat Shrink Tubing EPS-400
3M™ Heat Shrinkable Splice Jacket Kit HSJ 
3M™ Heat Shrink Tubing HDCW
3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
