3M™ PPS™ Series 2.0 Universal Shaker Core

  • 3M ID 7100161512
  • UPC 00051131264588

Double-sided design works with all PPS™ Series 2.0 hard cup sizes

Excellent for shops where paint shakers are used

Forms durable clamping surface when placing PPS™ Series 2.0 hard cups in paint shakers

View more details


  • Double-sided design works with all PPS™ Series 2.0 hard cup sizes
  • Excellent for shops where paint shakers are used
  • Forms durable clamping surface when placing PPS™ Series 2.0 hard cups in paint shakers
  • Fits with ¼-turn lid locking system for tight, reliable hold
  • Absorbs and distributes force from shaker for longer equipment life

3M™ PPS™ Series 2.0 Universal Shaker Core fits on top of the domed 3M™ PPS™ 2.0 Lid and fits into the ¼-turn lid locking system, creating a stable, durable and even surface for clamping PPS™ 2.0 hard cups tightly into paint shakers.

Shaker Core integrates into the ¼-turn lid locking system on PPS™ Series 2.0 Lid
Shaker Core integrates into the ¼-turn lid locking system on PPS™ Series 2.0 Lid
Designed for Using 3M™ PPS™ Series 2.0 Hard Cups in Paint Shakers
Excellent for using 3M™ PPS™ Series 2.0 in shops where mixing in paint shakers is common, our 3M™ PPS™ Series 2.0 Universal Shaker Core is designed specifically to work with PPS™ 2.0 Lids and reusable hard cups. Shaker cores are designed to fit on top of domed lids and to fit into the ¼-turn lid locking system, forming a tight fit to the cup and a reliable hold during the shaking process. The double-sided design works with all sizes of 3M™ PPS™ Series 2.0 hard cups. When the paint shaker is activated, the shaker core absorbs and distributes the force from the shaker through the clamps. Each side of the core makes an even and very reliable surface for clamping, and to help prevent the cup from tipping during temporary sealing and protection of paint materials.

This simple tool provides extra peace of mind during paint shaking and can result in longer life for reusable PPS™ Series 2.0 hard paint cups.

5 sizes of PPS™ 2.0 Spray Cup System
PPS™ Series 2.0 Spray Cup System is available in 5 sizes to fit the most common repairs in your shop
Next Generation of the 3M™ PPS™ Paint Preparation System
The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.

3M PPS Series 2.0 Cups and Lids
Cups feature printed mix ratios, clear access windows
Cleanest Disposable Cup System
Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.

Reduce Material Waste by Mixing in the Cup
3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you're mixing on a scale, use the "max fill" notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.

3M PPS Series 2. 0 lid
Domed lid design features full diameter filters in 125 or 200 microns
Improved Fluid Flow for More Consistent Paint Application
Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration — no assembly needed.

Increased stability for spray cup system
Stainless steel adapters deliver four points of connection to lids
More Confidence in the Connection to Your Gun
A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.

A System for Both Solvent-Based and Waterborne Products
Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.

Use the Right Size Cup for Every Repair
Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.

Reduce Solvent Usage by up to 70%
After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.

PPS Series 2.0 hard cup and liner
Disposable liners improve productivity and cleanup time
Your Spray Gun Functions at any Angle, Even Upside Down
Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.

The Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice
3M™ invented disposable cups for paint application and will continue to re-invent based on our customer's feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ system has earned the trust of experts in one of the most important parts of a repair or manufacturing process — paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.


Learn More About 3M™ PPS™ Series 2.0



Typical properties


For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.