3M™ Adhesive Transfer Tape L2+T5

  • 3M Product Number L2+T5
  • 3M ID B40071711

Withstands temperatures up to 225ºF (107ºC)

High initial tack to many open and closed cell foams

Excellent peel adhesion and shear strength

View more details

Details

Highlights
  • Withstands temperatures up to 225ºF (107ºC)
  • High initial tack to many open and closed cell foams
  • Excellent peel adhesion and shear strength
  • Bonds well to polyurethane (PU) ether, PU ester, cross-linked polyethylene foam, EPDM foam, neoprene foam, nitrile foam, microcellular foam

3M™ Adhesive Transfer Tape L2+T5 is a 5-mil transfer tape that offers maximum conformability and good adhesion to open and closed cell foam surfaces. It features an 83 lb. tan unprinted polycoated kraft liner for superior processing.

Recommended for Lamination to Many Open and Closed Cell Foams
3M™ Adhesive Transfer Tape L2+T5 features 5.0 mils (.12 mm) of adhesive coated on a 6.2 mils (.14 mm), 83 lb. polycoated kraft paper liner. This adhesive transfer tape (PDF, 407.6 Kb) is recommended for lamination to many open and closed cell foams, where adhesive conformability and wet-out is valued over dimensional stability during lamination. It offers initial high tack to many open and closed cell foams and can withstand temperatures up to 225°F (107°C). With excellent peel adhesion and shear strength, it offers a reliable bond on polyurethane (PU) ether, PU ester, cross-linked polyethylene foam, EPDM foam, neoprene foam, nitrile foam and microcellular foam.

Recommended Applications

  • Foam lamination

Understanding Adhesive Transfer Tapes
3M adhesive transfer tapes are pressure sensitive adhesives coated on a release liner, without a scrim or carrier. These adhesive tapes are more conformable than double coated adhesive tapes for applications with textured or irregular surfaces. For application, the tape is positioned, adhesive side down, to a surface and the liner is removed, exposing the backside of the adhesive to the joining surface.

Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

Click here for more information on 3M Design Solutions. (PDF, 44.94 Mb)

 

Typical properties

Reviews

Ask a 3M Expert

Ask a 3M Expert

Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Converter Markets Representative or a 3M Preferred Converter will contact you by phone or email.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.