Standard Abrasives™ Silicon Carbide Buff and Blend Roll imparts a satin finish to large surfaces when used with a power sander, and enables custom conversion or sheet sizing for use by hand or when working with a lathe or spindle-held part. The non-woven nylon material combines toughness with pliability, ensuring a consistent finish over contours and surface irregularities.
Versatile Product for Machine or Hand Use
We manufacture the Standard Abrasives™ Silicon Carbide Buff and Blend Roll in widths that fit most power sanders. Simply cut the sheet to the desired length for use on a vibratory orbital or straight-line sander. Likewise, sheets or pieces can be cut off the roll for use by hand on smaller or harder-to-reach areas of the workpiece, or to finish a part turning on a lathe or spindle. Jumbo rolls are available for conversion into specialty forms.
Use our Standard Abrasives™ Silicon Carbide Buff and Blend material to:
This roll of Standard Abrasives™ Buff and Blend material combines an open web of nylon strands with sharp-cutting silicon carbide and a resin bond, resulting in a conformable sheet that is durable enough for cleaning and finishing with a bench motor, power tool or by hand. A variety of Buff & Blend rolls are available to suit different application requirements, including aluminum oxide rolls (available separately).
Load-Resistant Construction Boosts Life and Performance
Standard Abrasives™ Buff and Blend products are load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.
The Many Benefits of Standard Abrasives™ Buff and Blend Products
Standard Abrasives™ Buff and Blend products invigorate deburring, cleaning, blending and finishing applications by helping operators reduce finishing steps, minimize costs and achieve greater throughput. Each Buff and Blend product and grade offers unique benefits, so operators can choose from a versatile range of options to ensure optimal performance on specific applications.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.