3M™ Cloth Roll 464W is an abrasive sanding cloth used to create discs and belts for use on stainless steel. It is made with a tough, Y-weight cloth backing and features closed coat construction for consistent sanding action. The silicon carbide abrasive, embedded cork particles and water-resistant backing make this cloth an ideal product for wet applications such as finishing and polishing.
Cork Polishing Advantage
Abrasives made with 3M™ Cloth Roll 464W are best suited for metal sanding and finishing thanks to its durability and fast cutting abrasive material. Its heavy, Y-weight cloth backing provides smooth operation and durability and can conform to the shape of contoured parts for consistent finishing. The abrasive side features closed coat construction for consistent finishes for an even visual grain pattern, and cork Particles embedded in the product help to provide soft, bright finishes for the best polished look. The distinct blue color and cork particle surface helps to easily differentiate it from other grits and grains.
Silicon Carbide Abrasives
This cloth uses silicon carbide, which is a popular choice among industrial professionals because of its fast cut-rate and smooth finish. This synthetic mineral is very hard and fractures easily, resulting in freshly exposed sharp edges that cut extra fast and produce a smooth, professional-looking finish. Silicon carbide products are commonly used for low-pressure applications such as cleaning and finishing on wood and metal. While it wears faster than aluminum oxide, it produces a superior finish.
Waterproof and Heat Resistant
This cloth also uses a resin bonding which is specially designed to resist thermal and chemical deterioration, which can occur during sanding. This bond is very tough and excellent for precision work on hard and soft wood. This also allows for faster sanding and a higher cut rate. Closed coat construction features a dense spread of abrasive grains across the surface of the cloth. This design cuts fast and provides a consistent, fine finish. The waterproof backing also enables the user to rinse areas of the workpiece and the cloth during use to prevent dust and debris from clogging the points of the abrasive, while producing a faster cut at the same time.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.