3M™ Stikit™ Vibrator Sander Roll 426U is an abrasive sheet stock constructed on an A-weight, light paper with pressure sensitive adhesive (PSA) backing and features an anti-load coating. Silicon carbide abrasive and lightweight paper backing make this an ideal product when using a vibrator sander for finishing applications like paint prep, white wood sanding, and solid surface finishing.
The open coat abrasive of the 3M™ Stikit™ Vibrator Sander Roll 426U is fast cutting, load resistant, and creates a smoother finish than aluminum oxide or garnet abrasives. Sized to accommodate various 4-1/2 inch vibrating sanders, the roll form minimizes waste and provides bulk stock for high production environments. To enhance handling for sanding and finishing, the 3M™ Stikit™ PSA backing holds the product securely during use and provides quick and easy change when the product is worn out. Other applications include general sanding, finishing, blending, surface leveling and prep prior to staining or painting, clear coat dulling, and bare wood sanding.
Silicon carbide is a synthetic mineral that is very sharp and commonly used for final finishing in whitewood sanding. While it breaks down faster than aluminum oxide, it produces a superior finish.
3M™ Stikit™ products are designed to handle a wide range of sanding and finishing needs. These high-quality abrasive products come ready to use with a pressure sensitive adhesive coating on the backside so they conveniently press on to a backup pad or hand pad, and remove cleanly, leaving an uncontaminated surface for the next sheet or disc.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.