1. United States
  2. All 3M Products
  3. Tools & Equipment
  4. Spray Equipment
  5. Spray Guns & Components
  6. Spray Guns
  7. 3M™ Accuspray™ ONE Spray Gun System with Standard PPS™

3M™ Accuspray™ ONE Spray Gun System with Standard PPS™

Part Number 165803M ID 7100099202UPC 00051131165809
  • ONE gun meets all of your spraying needs
  • Works with 3M™ PPS™ (Legacy) and 3M™ PPS™ Series 2.0, an all-in-one solution for mixing/measuring, filtering and spraying of liquid coating material
  • Replaceable atomizing heads afford the performance of a brand new gun on demand
  • Selection of atomizing heads allows for spraying of primer, sealer, base and clear coat
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Air Consumption (Imperial)
13 scfm
Air Consumption (Metric)
368.16 L/min
Application
Manual Spray Coating, Paint Application
Brand
Accuspray™
Case Quantity
4 Kits per Case
Operating Pressure (Imperial)
24 psi
Operating Pressure (Metric)
1.65 bar
Details
  • ONE gun meets all of your spraying needs
  • Works with 3M™ PPS™ (Legacy) and 3M™ PPS™ Series 2.0, an all-in-one solution for mixing/measuring, filtering and spraying of liquid coating material
  • Replaceable atomizing heads afford the performance of a brand new gun on demand
  • Selection of atomizing heads allows for spraying of primer, sealer, base and clear coat
  • PPS™ reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time by up to 50%
  • Kit includes Accuspray™ ONE Spray Gun, atomizing heads, hard cup, lids, liners and more

The 3M™ Accuspray™ Spray Gun System with Standard PPS™ combines the simplicity and easy maintenance of our Accuspray™ spray guns and with the material-saving, rapid clean-up convenience of PPS™. Replaceable atomizing heads afford the performance of a new gun, on demand and at a fraction of the cost. And the PPS™ disposable cup and liner system reduces solvent needed for cleanup by as much as 70%.

An all-in-one solution for mixing/measuring, filtering and spraying of primer, sealer, base and clear coat, our 3M™ Accuspray™ Spray Gun System with Standard PPS™ is a combination of convenience, versatility and efficiency.
The 1-pc. Accuspray™ ONE spray gun eliminates cleaning of small parts and pieces
ONE System for Every Spraying Need
An all-in-one solution for mixing/measuring, filtering and spraying of primer, sealer, base and clear coat, our 3M™ Accuspray™ Spray Gun System with Standard PPS™ is a combination of convenience, versatility and efficiency. This system features the Accuspray™ ONE Spray Gun - a lightweight, composite spray gun body that is molded in one piece, eliminating the complexity, wear and cleaning of small parts and pieces. The spray gun uses a series of replaceable, transparent atomizing heads which can be reused 5-10 times and then simply removed and replaced. This affords the performance of a brand new spray gun, on demand and at a fraction of the price.

Atomizing heads are available in 1.3 mm and 1.4 mm sizes for sealers, primer surfacers, basecoats and topcoats.
Replaceable, disposable atomizing heads deliver the performance of a new spray gun, on demand
Atomizing heads are available in 1.3 mm and 1.4 mm sizes for sealers, primer surfacers, basecoats and topcoats; a 1.8 mm size for higher-viscosity materials such as primer and gel coats; and a 2.0 mm size for heavy-duty applications using fluids like adhesives, undercoats or industrial coatings. And fast, easy controls for fan diameter, fluid and air pressure allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12" vertical or horizontal spray patterns. This equipment works with our Standard PPS™ system of reusable paint cups and disposable lids and liners, so you can be done with cleaning paint cups forever. ONE gun — ONE system for a complete range of applications.

Advantages of the 3M™ PPS™ System
Unlike conventional paint cup systems, our 3M™ PPS™ (PDF, 706.89 Kb) eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

Your Spray Gun Functions at any Angle, Even Upside Down
PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.

PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned.
Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

A Versatile System that Works with Most Spray Guns
Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun (PDF, 310.09 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun (PDF, 3.69 Mb), which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 15%.

The Bottom Line: Why 3M™ PPS™ is the Paint & Coatings Spray System of Choice
3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.


Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 80ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.