Ask a 3M Expert
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
3M™ Fastbond™ Contact Adhesive 30H
- | Select product options for IDs.
Details
Highlights
- FOR INDUSTRIAL USE ONLY: This product is designed exclusively for industrial applications
- SPECIAL FORMULATION: Offers high viscosity, making it compatible with roll coating
- ADHERES A VARIETY OF SUBSTRATES: Bonds most foamed plastics, plastic laminate, wood, plywood, and canvas
- TOUGH, RESILIENT BONDS: Creates a high-strength, high-temperature-resistant bond
- LONG BONDING RANGE: Delivers up to a four-hour bonding range
- A VARIETY OF APPLICATION METHODS: Can be applied by either brush or roller
- NON-FLAMMABLE: Non-flammable in its wet state
3M™ Fastbond™ Contact Adhesive 30H is a low-odor, water-based adhesive designed to deliver a high-strength, high-coverage bond with a bonding range of 4 hours. Post-formable and high-temperature-resistant, this adhesive is non-flammable in the wet state. 3M™ Fastbond™ Contact Adhesive 30H is proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas.
3M™ Low Mist Contact Adhesive 30 is ideal for decorative laminate applications where non-flammability and low VOCs are critical
- Most formed plastics
- Plastic laminate
- Wood
- Plywood
- Wood veneer
- Canvas
High Immediate Strength, Long Bonding Range
Formulated for success, 3M™ Low Mist Contact Adhesive 30 delivers high immediate bonding strength with a long bonding range. Our design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments.
Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
Typical properties
Resources
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
