3M™ NauticGrip™ Spray Adhesive IF

3 Products

1 of 1

Hover to zoom

Safely fuses laminating materials to structural core surfaces
Fine mist adhesive with green tracer for application accuracy
Used for infusion/vacuum forming composites
Typically used in marine bonding applications

View all details

For industrial/occupational use only. Not for consumer sale or use.

Net Weight (Imperial)

Net_Weight_Imperial

Product Form

Product_Form

3 Products Available

Available options:

Net Weight (Imperial) and Product Form

Specifications

Attribute Name	Value
Application Method	Brush, Roll, Spray
Brand	3M™, NauticGrip™
Color Family	Green
Container Size (Imperial)	15 Ounce
Container Size (Metric)	425 g
Form	Aerosol, Liquid
Net Weight (Imperial)	140 lb, 15 oz, 30 lb
Product Color	Green
Product Form	Aerosol, Cylinder
Volatile Organic Compounds (VOCs)	See Safety Data Sheet, Regulatory Data Sheet

Details

Safely fuses laminating materials to structural core surfaces
Fine mist adhesive with green tracer for application accuracy
Used for infusion/vacuum forming composites
Typically used in marine bonding applications

3M™ NauticGrip™ Spray Adhesive IF is designed to hold reinforcing fibers in place during infusion process of the resin without affecting surface finish or structural integrity. This adhesive is typically used in marine bonding applications.

Safely Fuses Laminating Materials to Structural Core Surfaces
3M™ NauticGrip™ Spray Adhesive IF is designed to hold mats, pads and similar types of dry materials to themselves or onto mold surfaces during resin infusion. Tinted green for application accuracy, this fine mist adhesive will not interfere with the curing process of vinyl esters, polyesters or styrene resins. 3M™ NauticGrip™ Spray Adhesive IF is a unique system used in the molding process, and is designed specifically to overcome the problems normally associated with using other types of adhesives, such as bonding failure, resin blockage, surface defects in the finished product and more.

About 3M™ NauticGrip™
Bring reliability, portability and profitability to your next project with the best marine adhesive in the industry - 3M™ NauticGrip™. The self-contained canister systems require virtually no set-up or clean-up, take up little space and offer water resistant, UV-stable performance.

Resources

Brochures

3M™ NauticGrip™ Adhesives Brochure (PDF, 474.1KB)

Data Sheets

Data Sheet

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.