Ask a 3M Expert
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.
3M™ Vibration Damping Tape 435
- | Select product options for IDs.
Details
Highlights
- Tape is suitable for damping vibration at extremely low temperatures (-76°F/-60°C)
- Viscoelastic acrylic polymer adhesive is optimized to convert vibrational energy to negligible heat that readily dissipates
- Meets F.A.R. 25.853(a)
- Linered for die-cutting to match parts for aerospace applications
- Resists weather and UV degradation, ensuring performance in many difficult applications
3M™ Vibration Damping Tape 435 is a low temperature, silver, dead soft aluminum foil tape. The aluminum foil constraining layer is coated with a pressure sensitive viscoelastic polymer on an easy release liner. This tape absorbs and dissipates vibration, reducing noise and fatigue.
Reduce structure borne noise and vibration
3M™ Vibration Damping Tape 435 (PDF, 340 Kb) is a 13.5 mil silver, dead soft aluminum foil backed anti-vibration tape. It is designed to reduce structure-borne noise and fatigue in metal and composite panels and support structures. It can achieve effective damping with as little as 10% surface coverage. This durable tape will resist moisture, weather, UV degradation and flame. It is a long aging tape designed to specifically perform in temperatures as low as -76°F/-60°C. The linered construction provides the ability to die cut this product. 3M™ Vibration Damping Tape 435 meets the requirements of F.A.R. 25.853(a).
Recommended Applications
- Reduce unwanted resonant noise, vibration and fatigue in metal panels and support structures
- Lower temperature aerospace and industrial applications
Typical properties
Resources
Reviews
Similar products
| Backing (Carrier) Thickness (Imperial) | 8 mil | |||
| Overall Width (Metric) | 7.6 mm, 10.2 cm, 15.2 mm, 25.4 mm, 50.8 mm, 177.8 cm, 203.2 mm, 254 mm, 304.8 cm | |||
| Overall Width (Imperial) | 1 in, 2 in, 3 in, 4 in, 6 in, 7 in, 8 in, 10 in, 12 in | |||
| Backing (Carrier) Thickness (Metric) | 0.2 mm | |||
| Adhesive Type | Viscoelastic Polymer |
3M™ Vibration Damping Tape 435
3M™ Vibration Damping Tape 434
3M™ Damping Foil 2552For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
