3M™ Finesse-it™ Felt Buffing Pad
- | Select product options for IDs.
Details
Highlights
- FULL POLISHING POTENTIAL: Designed for use with 3M™ Finesse-it™ Polishes to remove abrasive sanding scratches from clearcoats and high gloss painted surfaces
- FINISH IT: Removes abrasive sanding scratches and leaves behind a defect-free, high-gloss finish
- QUICK AND EASY PAD CHANGES: The 3M™ Hookit™ Attachment System allows for easy pad changes and helps optimize tool uptime
- TOOL VERSATILITY: Best results are achieved when running between 3,000–6,000 rpm on a rotary buffer or up to 12,000 rpm on a random orbital buffer
3M™ Finesse-it™ Felt Buffing Pads are designed to for use with 3M™ Finesse-it™ Polishes to remove abrasive sanding scratches from various types of clearcoats. Available in both 3 and 5-inch diameters for different application needs, these pads achieve best results when running between 3,000–6,000 rpm on a rotary buffer or up to 12,000 rpm on a random orbital buffer. Additionally, 3M™ Finesse-it™ Felt Buffing Pads are equipped with the 3M™ Hookit™ Attachment System, which holds the pad securely during use while providing quick pad change-outs to maximize tool uptime.
Buffing pad provides a soft, smooth surface for applying 3M™ Finesse-it™ polishes
Identifiable by its red and white design, with the 3M wordmark stamped on its backing, the 3M™ Finesse-it™ Buffing Pad comes in both 3- and 5-inch diameters. Achieve best results on a variety of clearcoats using the 3-inch pad when running between 3,000 and 6,000 rpm on a rotary polisher or between 10,000 — 12,000 rpm on a random orbital polisher. Our 5-inch buffing pad should run between 3,000 — 6,000 rpm on a rotary polisher or between 10,000 — 12,000 rpm on a random orbital polisher.
Buffing pads should be used with 3M™ Hookit™ Backup Disk Pads
This pad is manufactured with the 3M™ Hookit™ attachment system for quick pad attachment and removal. Hookit™ buffing pads conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results depend on the combination of coating type, polish and tools used.
Science of Shine
3M™ Finesse-it™ products are a line of specially engineered abrasives, compounds, polishes, and buffing pads for use on OEM and baked refinish paints to remove imperfections, sand scratches, or swirl marks on a variety of painted surfaces. Finesse-it products are an integral part of our 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
