3M™ Thin Flexographic Plate Mounting Tape E2105, Translucent, 5 mil, Roll, Config
- 3M Product Number E2105
- 3M ID 7100132980
Details
Highlights
- 0.005 inch (0.13 mm) double coated tape has the air release feature designed to allow air to escape from between the tape and the plate
- Non-linered side of the tape is designed for mounting to compressible sleeves
- Securely bonds the flexographic photopolymer plate to the compressible sleeve to prevent plate edge lifting during printing
- Clean removal from both the plate and the sleeve
3M™ Thin Flexographic Plate Mounting Tape E2105 is a double coated film tape constructed of a polyester film carrier with differential adhesives. It is specifically designed for mounting flexographic print plates to cushioned or compressible sleeves.
Mount Flexographic Plates with Confidence
3M™ Thin Flexographic Plate Mounting Tape E2105 is a double coated tape that has the air release feature designed to allow air to escape from between the tape and the plate. This crosshatched pattern creates a continuous and permanent network of micro-channels, allowing air to escape from between the tape and plate. It features excellent holding power on-press with easy and clean plate removal when demounting. In addition, it removes cleanly from the cushioned sleeve surface.
Recommended Applications
- Mounting flexographic print plates to cushioned sleeves or compressible sleeves
Keep the Presses Running and your Customers Coming Back
For decades, our products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficient of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation.
Typical properties
Resources
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
