- Offers excellent adhesion to both rubber and photopolymer plates
- Provides uniform coverage of solids when halftone dot reproduction is not critical
- Specially formulated for clean removal from plate and print cylinder or sleeve
- High adhesion helps reduce plate edge lifting
3M™ Flexomount™ Plate Mounting Tape 447DL is a double liner, double coated tape designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeves. The adhesive is specially formulated for clean removal from both the plate and the print cylinder or sleeve.
3M™ Flexomount™ Plate Mounting Tape 447DL features a soft rubber adhesive that offers excellent adhesion to both rubber and photopolymer plates. The high adhesion helps reduce the tendency for plate edge lifting and makes it a good choice for long runs. This gray double coated tape helps provide uniform coverage of solids when halftone dot reproduction is not critical.
Learn more about Flexographic Plate Mounting 400 Series
Recommended Applications:
- Mounting photopolymer print plates to flexographic printing cylinders or sleeves
- Mounting rubber printing plates to flexographic printing cylinders or sleeves
|
Product Number |
Application Thickness Inches (mm) |
Manufactured Target Thickness Inches (mm) |
Description |
Plates |
Cylinders |
Color |
Features |
3M™ Solid Printing Tapes |
400 Series — 3M™ Flexomount™ Solid Plate Mounting Tapes |
411DL, 411 |
0.015 (0.38) |
0.015 (0.38) |
Gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier. Available in single and double liner. |
P/R |
SS/SL |
Gray |
Gray vinyl tapes with high adhesion. Helps reduce edge lifting. Helps minimize pin holing on solid work. |
412DL, 412 |
0.020 (0.51) |
0.015 (0.38) |
P/R |
SS/SL |
Gray |
447DL, 447 |
0.010 (0.25) |
0.010 (0.25) |
P/R |
SS/SL |
Gray |
413DL |
0.015 (0.38) |
0.015 (0.38) |
Black double coated tape with a firm rubber adhesive on each side of a vinyl carrier. Available only in double liner |
P/R |
SS/SL |
Black |
Black vinyl with lower adhesion. Higher temperature and solvent resistance. Helps minimize pin holing on solids |
414DL |
0.020 (0.51) |
0.020 (0.51) |
P/R |
SS/SL |
Black |
Keep the Presses Running and your Customers Coming Back
For decades, our products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation.
Click here for more information on Flexographic Mounting Systems (PDF, 5.00 Mb)