1. United States
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Flexomount™ Plate Mounting Tape 411DL

3M™ Flexomount™ Plate Mounting Tape 411DL

  • Options available
  • | Select product options for IDs.

Offers excellent adhesion to both rubber and photopolymer plates

Double linered version of 411

Provides uniform coverage of solids when halftone dot reproduction is not critical

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 84KB)
Ask a 3M Expert

Details

Highlights
  • Offers excellent adhesion to both rubber and photopolymer plates
  • Double linered version of 411
  • Provides uniform coverage of solids when halftone dot reproduction is not critical
  • Specially formulated for clean removal from plate and print cylinder or sleeve
  • High adhesion helps reduce plate edge lifting

3M™ Flexomount™ Plate Mounting Tape 411DL is a double linered, double coated tape designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeves. The adhesive is specially formulated for clean removal from both the plate and the print cylinder or sleeve.

Single roll of gray tape
Gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier
3M™ Flexomount™ Plate Mounting Tape 411DL features a soft rubber adhesive that offers excellent adhesion to both rubber and photopolymer plates. The high adhesion helps reduce the tendency for plate edge lifting and makes it a good choice for long runs. This gray double coated tape helps provide uniform coverage of solids when halftone dot reproduction is not critical.

Recommended Applications
  • Mounting photopolymer print plates to flexographic printing cylinders or sleeve systems
  • Mounting rubber printing plates to flexographic printing cylinders or sleeves

Keep the Presses Running and your Customers Coming Back
For decades, our products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation.

Photopolymer and rubber printing plates in a factory
Designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeve systems

Typical properties

Resources

Reviews

Large Volume Order

Ask a 3M Expert

Close  
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.