The 3M™ Repulpable Splicing System 9990N is a double coated, splittable tape construction featuring an acrylic adhesive and an easy release paper liner, with liner scored for easy manual application and built-in sensor layer.
Designed for straight line flying splices, the built-in aluminium sensor with tape constrction eliminates the need for the traditional reflective label needed for splice detection. The very soft splicing side adhesive is designed for good "instant grab" on uncoated newsprint.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.