3M™ Heavy-Bodied Seam Sealer
- | Select product options for IDs.
Details
Highlights
- HIGH-PERFORMANCE: Two-part epoxy seals vertical and horizontal seams to match OEM seals
- METERED MIXING: Dual syringe cartridge eliminates the difficulty and mess of manual mixing
- NON-FLOWING: Heavy-bodied formula allows easy tooling for matching OEM seam sealer appearances
- FAST CURE TIME: Ideal for high-speed results, this sealant fully cures in just 1 hour
- SELF-MIXES: Makes a perfect formulation every time without mess
The 3M™ Heavy-Bodied Seam Sealer is a two-part epoxy seam sealer for all general purpose automotive sealing. It cures quickly to a tough, strong bead for lasting seam sealing protection and is used on door skins, floor pans, trunk floors, roof seams, and many other applications. The self-mixing system ensures a proper mix ratio every time - delivering a consistent cure rate and strength.
The two-part cartridge and nozzle self-mixes with a perfect formulation every time without messiness.
Mixing sealer components by hand often results in a big mess and waste of materials and time. Our high-performance 3M™ Heavy-Bodied Seam Sealer operates with a two-part cartridge and nozzle that self-mixes with a perfect formulation every time and without the mess. This efficient system helps reduce application waste, improves efficiency, and remains ready for job after job with no downtime for mixing mistakes.
Match OEM Appearances
This professional-quality black seam sealer can be used to seal vertical or horizontal seams on automotive surfaces primed with a 2K urethane, 2K epoxy primer, or clean, sanded paint. Its non-flowing, heavy-bodied formula allows technicians to texturize the seam to match OEM seam sealer appearances and duplicate OEM beads.
Durable, Fast-Cure Formula Creates a High Quality Seal
Our flexible formula works within a wide range of temperatures with no shrinking or cracking to achieve strong, durable construction. It offers a fast setup time of 6 minutes, decreasing downtime and allowing technicians to continue repair procedures quicker, increasing productivity. Moreover, the fast-cure formula means there is a limited time of uncured product on the car and the risk of damaging the seam by disturbing uncured seam sealer is greatly reduced. This enables technicians to quickly achieve a long-lasting, high quality seam seal.
Using the Seam Sealer Effectively
Our 3M™ Heavy-Bodied Seam Sealer for DMS (PN 58308) (PDF, 27.98 Kb) comes in a kit that includes a 600 mL cartridge, two "purple" mixing nozzles (PN 55847, also available in boxes) and an extension tube for attaching an OEM tip to the mixing nozzle. The 600 mL cartridges fit into our 3M™ Dynamic Mixing Applicator — Pneumatic (PN 05846).
3M™ Heavy-Bodied Seam Sealer in 200 mL cartridges (PN 08308) can be used with the following 3M™ Applicators: PN 08117 (manual), PN 08571 (manual), and PN 09930 (pneumatic) Also use the 3M™ Mix Nozzle: PN 08193 (6/bag), PN 8194 (50/box).
For either product, choose from 3M™ OEM Seam Sealer Tips PNs 08201, 08202, 08203, 08204, or 08205.
Typical properties
Resources
Reviews
Connect with us. We’re here to help.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
