Ask a 3M Expert
Ask a 3M Expert
Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Converter Markets Representative or a 3M Preferred Converter will contact you by phone or email.
3M™ Adhesive Transfer Tape 9502
- | Select product options for IDs.
Details
Highlights
- 2 mil nominal 220 adhesive offers good sheer strength
- Good peel adhesion to HSE (high surface energy) materials
- PCK liner protects adhesive and peels away quickly for easy handling
- Economical solution for a variety of general bonding applications
3M™ Adhesive Transfer Tape 9502 features 3M™ Industrial Acrylic Adhesive 220, which provides a good bond to HSE materials. This 2.3 mil adhesive is applied to a 4.2 mil polycoated kraft (PCK) paper liner, which protects it until it is ready to be bonded to the substrate.
- General industrial
- Metal bonding
- Painted metal bonding
- Applying nameplates, appliques and decorative trim to HSEs
- Graphic attachment
- Lamination to sub-surface printed polycarbonate, polyester graphic overlay materials
| Product | Description / Application Ideas | Adhesive Caliper (mils) |
Liner | Master Size | Specs | Adhesion | Chem. Resist. |
Temp. Range | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | Caliper (mils) |
Metal | HSE Plastic |
LSE Plastic |
Foam | Low (°F) |
High (°F) |
||||||
| 220 (Industrial Acrylic) | |||||||||||||
| 9502 | Economical attachment of graphics and industrial joining. 60" width master also available. | 2 | 58# PCK | 4.2 | 48" x 180 yd | UL | 8 | 7 | 1 | 2 | 8 | -40 | 350 |
| 9505 | Thicker version of 9502 for textured surfaces. 60" width master also available. | 5 | 58# PCK | 4.2 | 48" x 180 yd | UL | |||||||
| 9552 | Double-linered laminating adhesive version of 9502. | 2.3 | 58/58# PCK | 4.2 | 48" x 360 yd | UL | |||||||
| 9555 | Double-linered laminating adhesive version of 9505. | 4.9 | 58/58# PCK | 4.2 | 48" x 360 yd | UL | |||||||
Adhesive transfer tapes are rolls of pressure sensitive adhesive pre-applied to a special release liner. For application, the tape is simply pressed, adhesive side down, to a surface and the liner is peeled off. A variety of adhesive properties and liners are available to meet requirements for applications such as nameplate attachment to high and low surface energy plastics, appliance graphic overlays that perform in high temperatures, foam gasketing, web splicing, signs, posters, banners, point-of-purchase displays, and more.
Bringing Better Ideas to the Surface through Science
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
Find More 3M Industrial Adhesives and Tapes (PDF, 12.28 Mb)
Typical properties
Resources
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
