3M™ Ceramic Microspheres White Grade W-610 are solid, engineered particles with a typical whiteness (L Value) of 90 or greater and an effective d90 particle size of 32 μm. These unique particles offer formulation flexibility and may allow formulations with lower VOCs due to lower resin demand – as well as excellent scrub and burnish resistance.
What are Ceramic Microspheres?
Our 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings (PDF, 453.64 Kb) to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost.
Learn more about 3M™ Ceramic Microspheres (PDF, 840.64 Kb)
Abrasion, Scrub and Burnish Resistance
The benefits of the solid, high-strength ceramic microspheres come from their hardness and unique shape and size distribution; These particles deliver a number of improvements to paint performance in flat or matte finishes. One of the benefits is scrubbability since painted surfaces are often cleaned and scrubbed.
A common problem: paints can break or burnish — causing undesirable blemishes or change in gloss. A solution: 3M ceramic microspheres white grade W-610 deliver durable paint to your customers with scrub and burnish properties. Painted surfaces that use 3M ceramic microspheresW-610 offers improved durability properties. Paints formulated with 3M ceramic microspheres white grade W-610 can be scrubbed more times before scratches, paint defects and burnishing appear. This means that this product's excellent abrasion resistance could help protect painted surfaces against wear and tear. This is because our microspheres are strong and durable, with a crush strength of 60,000 psi (pounds per square inch) and Mohs hardness of 6.
We test starter formulations using the rigorous industry standard ASTM D2486 — a test that measures how many times a surface can be scrubbed before paint is removed. We have observed that W-610 allows formulations with better durability than W-210 as well as improved scrub and burnish over conventional fillers. 3M ceramic microspheres allow formulators to balance properties in their formulation to achieve optimal performance. Paint formulations made with 3M ceramic microspheres white grade W-610 can help the end user achieve painted surfaces that look unblemished and newer for a longer period of time.
Superior Viscosity and Easy Application
The benefits don't end there. Ceramic microspheres have a low polymeric binder demand, meaning because of their shape and size, they do not bind with as much polymer as other fillers. This in turn allows a lower viscosity at the same loading because less of the polymer is tied up with the fillers. Because our ceramic microspheres have a unique shape, size and distribution — and fewer sites (lower surface area per volume), formulators can create paints that have lower viscosities without sacrificing filler volume. Ceramic microspheres are a low binder demand filler. Conversely, other fillers such as calcium carbonate, mica and wollastonite have fractured, irregular shapes that can cause the viscosity to increase and can cause diminished paint performance in the final coating.
Formulating for the Future
Formulating low volatile organic compound (VOC) content is an important factor in the coatings industry. Our ceramic microspheres can help manage viscosity when paint manufacturers reduce the VOC content (solvent) of their paint. By using our ceramic microspheres, paint manufacturers are able to formulate in different ways and achieve valuable coating properties. For optimal results, 3M ceramic microspheres are typically added during the grind stage of paint formulation.
Formulations with ceramic microspheres can have lower viscosity at the same filler loading as formulations containing other common fillers. Smaller spheres can fill voids between larger ones to enhance packing for higher solids and reduced costs. These ceramic microspheres can allow formulation flexibility to help manufacturers meet the demanding performance and economic targets in the coating industry. In short, our fillers enable paints that last longer and maintain aesthetic appeal. Find the superior paint performance that you've been looking for from 3M, a company that has helped customers incorporate ceramic microspheres into their paints and coatings for over 20 years.
Higher filler loading
- Matte formulations
- Consumer paint
- Industrial coatings
- Architectural coatings
- Special purpose coatings