3M™ Diamond Polishing Cloth Disc 652WY
- | Select product options for IDs.
Details
Highlights
- Diamond mineral encapsulated in a ceramic bead provides stock removal and fine finishes
- Water-resistant cloth backing can be used with coolant
- Tough enough for hard-to-finish materials like chilled iron, ceramics and thermal spray coatings
- Flexible J-weight cloth backing supports mineral for hand finishing and polishing
- Available in grades 3000, 8000, and 50,000 mesh
3M™ Diamond Polishing Cloth Disc 652WY is engineered with micron-graded diamond, a long-lasting resin bond and a flexible, water-resistant J-weight cloth backing for polishing ceramics, carbide, cast iron and other hard-to-grind materials.
Constructed with micron-graded diamond particles, these abrasives perform well in both wet and dry applications
Uniquely engineered to tackle the toughest jobs, 3M™ Diamond Polishing Cloth Disc 652WY is constructed with micron-graded diamond particles encapsulated in a ceramic bead. As the ceramic erodes, diamond particles continue to be exposed leaving a fresh cutting surface. Diamond mineral cuts fast and delivers good stock removal, a range of finishes and long-lasting abrasive life on hard to grind materials.
Diamond is extremely useful in polishing for its unique ability to produce excellent surface finishes combined with high removal rates on hard to grind materials.
652WY incorporates diamond mineral encapsulated in a ceramic bead, bonded to a durable, water-resistant, J wt. cloth backing.
Use Wet or Dry
A water-resistant, flexible J-weight cloth backing means this product can be run with coolant. Coolant is useful remove grinding swarf and debris from the grinding interface. This disc is available in 3000 Mesh, 8000 Mesh or 50000 mesh so users can find the product that best suits their needs.
Tough Abrasive for Hard-to-Grind Materials
For those hard-to-grind materials, turn to 3M™ Diamond Polishing Cloth Disc 652WY. This disc's overall toughness makes it ideal for polishing and finishing ceramics, chilled cast iron, thermal spray coatings and the many extremely hard composites often used in an increasing number of industries.
Learn More about Abrasives for Hard-to-Grind Materials (PDF, 11.17 Mb)
| 3M Abrasive Base Steel | Dimensioning | Chrome Grinding | Thermal Spray Grinding | Superfinishing and Finishing |
|---|---|---|---|---|
| 3M™ Cubitron™ II Abrasive Belt 984F | ||||
| 3M™ Trizact™ Cloth Belt 363FC | ||||
| 3M™ Cloth Belt 966F | ||||
| 3M™ Trizact™ Cloth Belt 347FC | ||||
| 3M™ Trizact™ Diamond Cloth Belt 663FC | ||||
| 3M™ Diamond Polishing Cloth Belts 651WY and 652WY | ||||
| 3M™ Diamond Lapping Film 661X and 663X | ||||
| 3M™ Diamond Microfinishing Film 675L | ||||
| 3M™ Flexible Diamond Rolls and Belts | ||||
| 3M™ Diamond Cloth Disc 674W | ||||
| 3M™ Diamond Wheel 637BI | ||||
| 3M™ Resin Bond Superabrasive Wheels | ||||
| Scotch-Brite™ 645DC Diamond Unitized Wheels |
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
