1. United States
  2. All 3M Products
  3. Abrasives
  4. Abrasive Discs
  5. Film Discs
  6. 3M™ Trizact™ Hookit™ Film Disc 568XA

3M™ Trizact™ Hookit™ Film Disc 568XA

  • Options available
  • | Select product options for IDs.

Proprietary 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results

Use wet or dry to create high gloss level for glass defect repair and solid surface finishing

Micron sized abrasive pyramids produce a high-gloss

View more details
Frequently viewed resources
PDF (1) Copy 26Safety Data Sheet (PDF, 0B)

Details

Highlights
  • Proprietary 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
  • Use wet or dry to create high gloss level for glass defect repair and solid surface finishing
  • Micron sized abrasive pyramids produce a high-gloss
  • Well suited for use on mini random orbital sanders to produce a polish-ready finish
  • Produces finer finishes than paper and film-backed abrasives

3M™ Trizact™ Hookit™ Film Disc 568XA uses microreplication technology by 3M along with cerium oxide particles formed into tiny pyramids of abrasive mineral and then coated on a film backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish when used either wet or dry.

3M™ Trizact™ Hookit™ Film Disc 568XA
3M Trizact™ Film Discs 268XA and
568XA — excellent for polishing solid
surface, acrylics, glass and removing
overspray or dirt on topcoats
Get a Superior Finish on Solid Surfaces, Topcoats, Glass
Our 3M™ Trizact™ Hookit™ film discs are suitable for use on a variety of solid surfaces, topcoats, and to accommodate most finish and process requirements. This disc is manufactured with the 3M™ Hookit™ attachment system for quick mounting and removal and to hold the disc securely in place during use. Hookit™ discs conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the disc.

Better Results in Less Time, Fewer Steps
Unlike conventional abrasives, 3M™ Trizact™ discs start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. 3M™ Trizact™ discs last longer than conventional discs and provided precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface ensure consistent performance and eliminate disc-to-disc variation.

Cerium Oxide for Final Polishing
Our 3M™ Trizact™ Hookit™ Film Disc 568XA uses cerium oxide abrasive mineral. Cerium oxide is an oxide of the rare earth metal, cerium. The average grain size of the particle is measured in nanometers in raw form, thus making it one of the most effective abrasives for final polishing steps on solid surfaces (PDF, 116 Kb). It is heat resistant and effective as a polishing agent for glass mirrors, plate glass, crystal, television tubes, ophthalmic lenses, precision optics, precious, and semiprecious stone.

Typical properties

Resources

Reviews

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.