3M™ Trizact™ PSA Cloth Disc 237AA
- | Select product options for IDs.
Details
Highlights
- Disc form enables operators to get in, over and around workpieces
- PSA attachment makes disc to tool attachment swift and easy
- Structured abrasives with aluminum oxide mineral cuts sharp, yielding consistent results
- X-weight backing enhances abrasive durability and stiffness, resisting wear and tear
- Available in a range of grades
3M™ Trizact™ PSA Cloth Disc 237AA features sharp-cutting aluminum oxide mineral adhered to an X-weight, water-resistant polyester cloth backing. Made using microreplication technology, this abrasive works well for a range of low- to medium-pressure applications: finishing, polishing, blending and deburring. It can be used on many metals, including mild and stainless steel.
Feature an engineered surface of patterned, microscopic three-dimensional structures resembling pyramids
3M™ Trizact™ PSA Cloth Disc 237AA has two characteristics that make it desirable for your finishing, polishing, blending and deburring needs: microreplication technology and a PSA attachment. Let's begin with microreplication technology.
3M Science, Applied to Microreplication Technology
3M™ Trizact™ Abrasives feature an engineered surface of patterned, microscopic three-dimensional structures resembling pyramids. As the abrasive is used, the tops of the pyramids wear away, continually exposing fresh mineral. This cycle of renewal ensures a consistent cut rate and finish throughout the long life of the disc. 3M™ Trizact™ PSA Cloth Disc 237AA, specifically, features micron-graded aluminum oxide particles formed into pyramids and adhered to an x-weight backing. The x-weight backing is durable and stiff; it prevents the abrasive from yielding when it comes in contact with the workpiece, so you get a thorough and aggressive cut.
3M™ Trizact™ Abrasive surface, 50x magnification
In addition to micron-graded aluminum oxide, 3M™ Trizact™ PSA Cloth Disc 237AA has a pressure-sensitive adhesive backing. Applying 237AA to your power tool is as simple as applying light pressure and adhering the disc to a backup pad (sold separately). When the work is complete, the disc can be removed cleanly and easily. We included the PSA backing on 237AA to help operators enhance their productivity and throughput.
Altogether, our 3M™ Trizact™ PSA Cloth Disc 237AA is a sharp-cutting, ready-to-use abrasive designed to help you maximize your efforts and get the most out of your work.
Learn more about 3M™ Trizact™ Film (PDF, 998.6 Kb)
Typical properties
Resources
Related Products
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
