Standard Abrasives™ Quick Change Silicon Carbide 2 Ply Disc
- | Select product options for IDs.
Details
Highlights
- Small-sized disc performs high speed applications on non-ferrous metals, stainless steel, fiberglass, plastic and glass
- 2-ply backing adds stiffness and extends performance life for low to medium-pressure applications
- A degree of flexibility enables grinding on flat and contoured surfaces
- Choose from TP, TR, TS and TSM quick change attachment styles
- Sharp silicon carbide mineral cuts faster than aluminum oxide and produces a smoother finish
Choose a Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc to quickly grind, deburr, blend and finish non-ferrous metals, stainless steel and composites. The 2-ply backing provides added stiffness and disc life for low to medium-pressure applications while yielding to accommodate both flat and contoured surfaces.
Best on non-ferrous metals thanks to its sharp cutting points, which provide rapid cutting action
Our Standard Abrasives™ Quick Change Silicon Carbide 2-Ply Disc is available in a range of sizes, coarse grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications.
Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS and TSM systems feature a metal hub that securely attaches to its holder pad with a simple twist.
Sharp, Fast Cut and Fine Finish
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding. While it may have a shorter life than aluminum oxide, it produces a finer finish and should be used where the best possible finish is desired.
For a more aggressive application, choose our Quick Change Silicon Carbide 3-Ply Disc (sold separately). The versatile portfolio of Standard Abrasives™ Quick Change Discs helps to ensure that operators will find a disc that is well-suited to their project needs and applications.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
