Standard Abrasives™ Cleaning Disc 840701, 6 in x 1/2 in, 5/Pac, 50 ea/Case
- 3M ID 7000046880
- UPC 00051115331404
Details
Highlights
- Ideal for cleaning applications like corrosion, rust, scale and paint removal
- Open abrasive design resists loading for faster cut-rates
- Nylon mesh and silicon carbide combination offers a fine cleaning finish
- Provides consistent finish on flat and irregular surfaces
Standard Abrasives™ Cleaning Disc is ideal for surface cleaning tasks like removing corrosion, rust, scale, paint, varnishes and sealants. Constructed of large nylon filament, this disc’s open, non-loading structure performs rapid removal of surface contaminants while producing fine finishes.
Silicon Carbide Abrasive
Our Standard Abrasives™ Cleaning Disc is constructed of large nylon filament and coarse silicon carbide grain for rapid removal of surface contaminants. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. While the mineral breaks down faster than aluminum oxide, it produces a finer finish. This makes the Standard Abrasives™ Cleaning Disc best suited for sanding and finishing applications on fiberglass, composites or soft metals.
Open Coat Construction
Abrasives cut better and last longer when dust isn’t clogging the cutting surface. Open coat construction means the abrasive grains are placed with space between them to help evacuate sanding debris and avoid clogging of the grains’ cutting edges. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade. This all adds up to increased productivity and reduced material consumption.
Quality Standard Abrasives™ Solutions for Industrial Applications
The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
