3M™ Heat Shrink Tubing TMW

  • Ideal for manufacturing heat shrink butt connectors, disconnects, ring terminals and fork terminals
  • Color-coded for quick and easy identification of the wire
  • Suitable for use with mechanical assemblies, braided-shield pigtails, electronic components, electrical wire splices, breakouts, solder joints, delicate wire terminations and end-sealing of electrical cables
  • Made of red semi-rigid polyolefin
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Agency Approvals
UL Recognized
Brand
3M™
Color Family
Blue, Pink, Red, Yellow
Elongation
400 %
Family
3M™ Heat Shrink TMW
Flame Retardant
No
Inner Diameter After Shrink (Imperial)
0.061 in, 0.073 in, 0.085 in, 0.11 in
Inner Diameter After Shrink (Metric)
1.55 mm, 1.85 mm, 2.16 mm, 2.79 mm
Inner Diameter Before Shrink (Imperial)
0.183 in, 0.22 in, 0.255 in, 0.33 in
Inner Diameter Before Shrink (Metric)
4.65 mm, 5.59 mm, 6.48 mm, 8.38 mm
Manufacturing Origin
USA
Maximum Operating Temperature (Celsius)
110 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
230 Degree Fahrenheit
Minimum Expanded Tubing I. D.
0.183 in, 0.22 in, 0.255 in, 0.33 in
Operating Temperature (Celsius)
-55 to 135 Degrees Celsius
Overall Length (Imperial)
0.75 in, 0.875 in, 1 in, 1.5 in, 1.7 in, 1.85 in
Product Color
Blue, Pink, Red, Yellow
Shrink Ratio
2:1, 3:1
Tubing Type
Dual Wall (Adhesive)
Details
  • Ideal for manufacturing heat shrink butt connectors, disconnects, ring terminals and fork terminals
  • Color-coded for quick and easy identification of the wire
  • Suitable for use with mechanical assemblies, braided-shield pigtails, electronic components, electrical wire splices, breakouts, solder joints, delicate wire terminations and end-sealing of electrical cables
  • Made of red semi-rigid polyolefin
  • Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
  • Rated for 600V applications

3M™ Heat Shrink Tubing TMW is a multiple wall terminal protection sleeve that is ideal for use in manufacturing heat shrink butt connectors, disconnects, ring terminals and fork terminals. This tubing has a 3:1 shrink ratio and provides insulation for 600V rated applications. It features semi rigid polyolefin construction to offer moisture seal protection.

3M™ Heat Shrink Tubing TMW is color coded for quick and easy identification of the wire. This tubing is co extruded and cross linked to produce a meltable inner wall. When the tubing cools down, it forms an insulating barrier against chemicals and solvents. It's ideal for use with mechanical assemblies, braided shield pigtails, electronic components, electrical wire splices, breakouts, solder joints, delicate wire terminations and end sealing of electrical cables. It withstands temperatures of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.