3M™ Mining Cable Splice Kit 3100 Series

4 Products

1 of 1

Hover to zoom

Specially designed to splice flexible power cables
MSHA Approved and RoHS 2011/65/EU Compliant‎.

View all details

For industrial/occupational use only. Not for consumer sale or use.

Packaging

4 Products Available

Available options:

Packaging

Specifications

Attribute Name	Value
Adhesive Material	Mastic
Application	Electrical Maintenance, for In-Line Splicing, for Power Feeder Circuits, for Repair and Splicing of Mine Conduit, For Splicing Flexible Power Cable Rated from 600V to 15 kV, for Use with Standard In-Line Crimp or Parallel (Crow’s Foot) Connectors
Application/Industry	Irrigation, Mining, Solar
Brand	3M™
Cable Type	Multiple
Conductor Sizes (Imperial)	6 to 1 AWG (14 to 38 mm²) Can Accommodate Up to 500 kcmil with Additional Tape
Dielectric Strength (V/mil)	379 V/mil
Family	3100, 3M™ Mining Cable Splice Kit 3100 Series
Kit Includes	Instruction Booklet
Lug/Stem Connector Included in Kit	No
Material	Mastic
Maximum Conductor Size (Imperial)	16 AWG, 6 AWG
Maximum Conductor Size (Metric)	1.5 mm², 16 mm²
Maximum Operating Temperature (Celsius)	90 Degree Celsius
Maximum Operating Temperature (Fahrenheit)	194 Degree Fahrenheit
Maximum Operating Voltage	15 kV, 2 kV
Minimum Conductor Size (Imperial)	16 AWG, 6 AWG
Minimum Conductor Size (Metric)	14 mm²
Minimum Operating Voltage	110 V, 2 kV, 5 kV, 600 V
Packaging	1/Case
PlantAnalystID	ABBA-EEJF6P
Product Type	Mining Tapes
Recovered Wall Thickness	0.114 in
RoHS 2011/65/EU Compliant	Yes
RoHS EU Comments	RoHS 2011/65/EU compliant without exemption
Round Size (Diameter)	8 kV
Splice Type	Inline
Tape Type	Mining
Units per Case	10, 40
Voltage	110 V - 15 kV, 2 kV, 5 kV - 15 kV, 600 V - 2 kV

Details

Specially designed to splice flexible power cables
MSHA Approved and RoHS 2011/65/EU Compliant‎.

3M™ Mining Cable Splice Kit 3100 is specially designed for splicing 600V to 15kV rated flexible power cables. It is perfect for power feeder circuits, standard in line crimp or parallel connectors, and the repair and splicing of mine conduit. It splices W, G, W GC, G GC, SHD GC, MPF and MPF GC flat and round cables.

3M™ Mining Cable Splice Kit 3100 includes Scotch® Heavy Duty Mining Tape 31, Scotch® Linerless Rubber Splicing Tape 130C, 3M™ Temflex™ Mining Grade Vinyl Electrical Tape 1700P and Scotch® Electrical Semi Conducting Tape 13. The flame retardant Scotch® heavy duty mining tape 31 provides moisture and abrasion resistance. MSHA Approved and RoHS 2011/65/EU Compliant‎.

Resources

Catalogs

3M™ Splices, 2013 Electrical Products Catalog (PDF, 12.2MB)

Data Sheets

3M™ Mining Cable Splice Kits, 3100 Series Data Sheet (PDF, 23.7KB)

Instructions

Safety Data Sheets

3M™ MSTK Mining Splice Tape Kit Series (PDF)

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.