3M™ Scotchlok™ Vinyl Insulated Butted Seam Bullet-Style Male Disconnects

6 Products

1 of 1

Hover to zoom

This male disconnect terminal offers excellent holding force
Allows for quick and easy disconnect of wires
Mates with 0.156-in wide female tab
Accommodates wire sizes 22 to 18 AWG

View all details

For industrial/occupational use only. Not for consumer sale or use.

Overall Diameter (Imperial)

Overall_Diameter_Imperial

Packaging

6 Products Available

Available options:

Overall Diameter (Imperial) and Packaging

Specifications

Attribute Name	Value
Barrel Style	Butted
Brand	Scotchlok™
Bullet Diameter	0.180
Color Family	Blue
Connection Width (Imperial)	0.156 in, 0.18 in
Connection Width (Metric)	3.962 mm, 4.572 mm
Disconnect Type	Male
Fastener Orientation	Male
Insulation Material	Vinyl
Mating Snap Diameter (S)	0.156 Inch, 0.18 Inch, 0.180 Inch
Maximum Insulation Outer Diameter (Imperial)	0.15 in, 0.17 in
Minimum Order Quantity	100
Overall Diameter (Imperial)	0.39 in
Overall Length (Imperial)	0.83 in
Overall Length (Metric)	21 mm
Packaging	100 per bottle, 1000 per bulk box
Pad Width	0.156 in, 0.18 in
Product Color	Blue
Solution for	Wireless Network: Infrastructure Accessories
Tab Width	0.187, 0.250
Terminal Style	Bullet Snap Plug
Terminal Type	Bullet, Standard
Units per Case	1000, 500

Details

This male disconnect terminal offers excellent holding force
Allows for quick and easy disconnect of wires
Mates with 0.156-in wide female tab
Accommodates wire sizes 22 to 18 AWG
Made of durable brass for good conductivity and has corrosion-resistant tin plating
Withstands a temperature range of -40 to 221 degrees F (-40 to 105 degrees C)
Rated 600V for building wire and 1000V for signs, fixtures or luminaires
1000/case

3M™ Scotchlok™ Vinyl Insulated Butted Seam Bullet-Style Male Disconnect offers superior holding force while allowing for quick and easy disconnect. The snap plug has a vinyl-insulated, butted-seam barrel and withstands temperatures of -40 to 221 degrees F (-40 to 105 degrees C). Its durable brass construction offers good conductivity and a tin-plated finish resists corrosion.

3M™ Scotchlok™ Vinyl Insulated Butted Seam Bullet-Style Male Disconnect attaches to the mating part with a tongue that slips over the female tab. The snap plug has a butted-seam barrel that is covered by a funnel-designed, rigid-molded, polyvinyl chloride sleeve. The polyvinyl chloride sleeve serves to guide the wire into position while providing electrical contacts and mechanical stress relief at the point of insulation. It has an abrasion-resistant, flared, vinyl-sleeve insulation which ensures easy crimping. RoHS 2011/65/EU Compliant.

Resources

Catalogs

3M™ Wire Terminals, 2013 Product Catalog (PDF, 17.1MB)

Data Sheets

Regulatory Material

EMD Shelf Life Statement (PDF, 90.3KB)

Safety Data Sheets

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.