3M™ Clear Wire Pulling Lubricant WLC is a clear water-based gel that acts as an excellent lubricant for pulling electrical and communication cable. This easy to apply gel dries off slowly on cables. The lubricant produces low coefficient of friction to reduce the chance of cable damage from high pulling forces.
3M™ Clear Wire Pulling Lubricant WLC is a consistent gel that does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature range of 20 to 120 degrees F (-6.7 to 49 degrees C). C UL Listed and RoHS 2011/65/EU Compliant.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.