1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ 3/C Armored Power Cable Low Voltage Splice 5734, 0-600 kV, 250-500 kcmil, 1/case

3M™ 3/C Armored Power Cable Low Voltage Splice 5734, 0-600 kV, 250-500 kcmil, 1/case

Part Number 57343M ID 80610981765UPC 00054007431756
  • Designed for use with armor power cable
  • Used for indoor and outdoor installations
  • Perfect for use in aerial, direct-burial and submersible applications
  • Rated for up to 1 kV applications
 More...
View all details
View Legal Disclaimer
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Cable Type
Armored Power Cable
Conductor Sizes (Imperial)
500 kcmil
Conductor Type
Aluminum or Copper
Manufacturing Origin
USA
Maximum Conductor Size (Imperial)
500 kcmil
Minimum Conductor Size (Imperial)
250 kcmil
Number of Conductors
3
Overall Jacket Diameter
1.55 to 4.0 Inch
Splice Type
Inline
Voltage
1 kV, 600 kV
Details
  • Designed for use with armor power cable
  • Used for indoor and outdoor installations
  • Perfect for use in aerial, direct-burial and submersible applications
  • Rated for up to 1 kV applications
  • Includes 1 PST jacket tube, • constant force springs, • shielding tape 24 strips and 1 copper shielding sleeve
  • CSA Certified and RoHS 2011/65/EU Compliant

These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00” (16–10 mm). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 15’ rolls

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.