3M™ Stikit™ Paper Roll 210U, P220 A-weight, Config
- 3M Product Number 210U
- 3M ID 7100069975
Details
Highlights
- Stikit™ adhesive backing allows for quick application and easy removal
- Light, A-weight paper backing offers excellent flexibility in hands on applications
- Aluminum Oxide abrasive cuts fast and provides a consistent, fine finish
- Open coat helps to prevent loading during use
- Resin bond resists deterioration from heat, extending the life of the abrasive
3M™ Stikit™ Paper Roll 210U is a general purpose abrasive sanding paper with a convenient adhesive backing ready for quick and easy attachment to a 3M™ Stikit™ backup pad (sold separately). Constructed with an open coat of aluminum oxide grains on a light, A-weight paper backing to make it an ideal product for sanding applications such as paint prep, sealer sanding, and solid surface finishing.
May be used for light sanding
Our 3M™ Stikit™ Paper Roll 210U is designed to handle a wide range of sanding and finishing needs. These high-quality, coated abrasive products come ready to use with a pressure sensitive adhesive coating on the backside so they conveniently press on to the backup pad, and remove cleanly, leaving an uncontaminated surface for the next attachment. The Stikit™ roll should be used in conjunction with our 3M™ Stikit™ backup pad (sold separately) that is attached to the sander.
Aluminum Oxide Abrasive
Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used for sanding and finishing applications. Aluminum oxide is suitable for use on a wide variety of materials.
Designed to Resist Loading
Sanding rolls cut better and last longer when dust isn't clogging the cutting surface of the abrasives. Open coat construction means the abrasive grains are placed with space between them to help evacuate dust and other sanding debris and avoid clogging the cutting edge of the grains. This allows the sheet to continue cutting even when sanding metals, paints, and other materials that would, otherwise, clog the grain and hinder sanding ability. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade. All of this adds up to increased productivity and reduced material consumption.
Learn more about Stikit Line of Coated Abrasive Products (PDF, 20.55 Mb)
Typical properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
