3M™ Hi-Strength 94 ET Adhesive Bulk creates an aggressive postformable bond for attaching decorative laminate, metal and some rubber substrates. This high strength adhesive is typically used in woodworking and specialty vehicle applications, especially where VOCs are a concern. The adhesive can be sprayed, rolled or brushed onto surfaces to reduce overspray and adhesive waste.
3M™ 3M™ Hi-Strength 94 ET Adhesive Bulk holds strong in critical applications and is often used in marine and specialty vehicle applications to install carpet, rubber or synthetic flooring. The formula's more aggressive tack offers a fast grab with sufficient open time to position and adjust materials before bonding, reducing rework and increasing flexibility. With a solids weight percentage of 20 - 25 and a non-telegraphing spray pattern, this adhesive provides higher coverage with less waste than competing spray adhesives and helps create a uniform hold. As with all contact based adhesives, sufficient and uniform pressure should be applied to ensure a strong bond. This adhesive is CARB* and SCAQMD compliant, GREENGUARD® certified and helps contribute to LEED® credits.
* Meets applicable 2017 California Air Resource Board VOC limits for web spray adhesives.
Typical applications in woodworking, transportation, construction and general industrial markets include:
Bringing Better Ideas to the Surface through Science and Innovation
The 3M Industrial Adhesives and Tapes Division applies the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, these technologies help customers deliver competitive products to the market faster and more efficiently.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.