3M™ Black Weatherstrip Adhesive

  • 3M ID B5005005008

Formulated specifically for use with ethylene propylene diene M-class rubber (EPDM)

Forms flexible, waterproof bond

Easy to brush and spread right from the tube, saving time

View more details

Details

Highlights
  • Formulated specifically for use with ethylene propylene diene M-class rubber (EPDM)
  • Forms flexible, waterproof bond
  • Easy to brush and spread right from the tube, saving time
  • Resists oil, grease and solvents for permanent repairs
  • Bonds to a range of surfaces including vinyl, gaskets, metal, fabrics and rubber

3M™ Black Weatherstrip Adhesive is designed specifically to bond EPDM rubber, excellent for the rubber seals on car doors, trunks and sun roofs. This flexible, high-strength adhesive helps ensure a tight waterproof seal, and delivers fast strength build-up. It works right out of the tube, holding rubber parts such as weatherstripping in place and resisting oil, grease and solvents.

A Durable Bond Where it Matters Most
Preferred by auto professionals for decades, our 3M™ Black Weatherstrip Adhesive was developed by 3M to bond with weatherstripping and other rubber parts around doors, trunks, T-tops and sun roofs . This adhesive is designed specifically to bond ethylene propylene diene M-class rubber (EPDM), the material most commonly used in automotive weatherstripping. It also bonds permanently to a large variety of surfaces including rubber, fabrics, gaskets, seals and metal. The weatherstripping adhesive is very easy to use. Simply squeeze it right from the tube, easily brush and spread as needed on each surface, and let it cure for up to 24 hours. The adhesive remains flexible, yet it resists nearly any environmental condition you’re likely to encounter in your vehicle.

3M™ Black Weatherstrip Adhesive can also be used for holding vinyl headliners and side panels in place. It applies most effectively when used with 3M™ General Purpose Adhesive Cleaner 08984 or 3M™ Gasket Prep and Parts Cleaner 08901.

The Science of Better Vehicle Care from 3M
3M has been developing new ways that the science behind adhesive technology can apply to the lives of automotive enthusiasts like you. Our 3M™ Black Weatherstrip Adhesive is a great example – decades of knowledge in a product that specifically delivers better results, and helps you get the most enjoyment and value from the vehicles you own.

Typical properties

Reviews

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.