1. United States
  2. All 3M Products
  3. Tools & Equipment
  4. Holders & Back-up Pads
  5. 3M™ Hookit™ Back-up Pad, 05717, 7 in x 3/4 in 5/8-11, 1 per case

3M™ Hookit™ Back-up Pad, 05717, 7 in x 3/4 in 5/8-11, 1 per case

  • 3M ID 7000042720
  • UPC 00051131057173

Foam construction adds support for jobs ranging from paint removal to fine polishing

Soft tapered edge helps improve control

Range of pads includes soft, standard and hard densities

View more details

Details

Highlights
  • Foam construction adds support for jobs ranging from paint removal to fine polishing
  • Soft tapered edge helps improve control
  • Range of pads includes soft, standard and hard densities
  • Available with 5/8-11 interior threads to fit low-speed polishers and sanders for versatility
  • Hole patterns provide escape route for dust, improve dust extraction
  • 3M™ Hookit™ attachment system provides easy disc changes and optimizes disc life

The 3M™ Hookit™ Back-up Pad is available in soft, medium and hard foam densities for support during jobs from paint removal to fine finishing. Center-hole pads feature flat rigid centers and softer edges, providing added control. The 6- and 7-in. pads feature several hole patterns to promote dust extraction. Hookit™ attachment system makes changing discs fast and easy.

A Back-up Pad for Faster, Easier, Better Sanding
Designed for use with 3M™ Hookit™ abrasive discs, our 3M™ Hookit™ Back-up Pad is built for added support, control and speed during automotive sanding jobs from paint removal to polishing. These 6” and 7” pads are available with soft, medium and hard density foam for a range of applications from paint stripping to polishing. Each center-hole pad features a flat, rigid center for support and softer, tapered edges for added control. Seven-hole or 15-hole patterns are built in to improve dust extraction, reduce loading and increase abrasive life. Disc pads are available with 5/8-11 interior threads to fit a variety of low-speed (maximum 3000 RPM) power polishing and sanding tools.

About Our Hookit™ Attachment System for Faster Change-Outs
The Hookit™ attachment system has a hook-and-loop feature which makes disc attachment, removal, and re-attachment clean and easy. It also facilitates use and re-use of the disc for maximum product life. Hookit™ sheets have a brushed nylon loop backing of the type most commonly used in everyday hook-and-loop applications. A range of Hookit™ disc backup pads features hooks which grip the brushed nylon loop backing. It’s simple: just attach the disc and start sanding. The disc removes just as cleanly and easily. The Hookit™ system is designed for work spaces and applications where adhesive backed abrasives may become contaminated by dust, dirt or debris.

Typical properties

Resources

Reviews

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.