3M™ Adhesive Transfer Tape 6035PC is a pressure sensitive transfer tape specifically formulated to be low fogging. It features good adhesion to many lower surface energy materials and is ideal for use in automotive interior applications. This tape is 5.0 mils (.13 mm) of adhesive coated on a 4.2 mil (.10 mm), 58 lb. polycoated kraft paper liner.
Low Fogging Adhesive Tested to SAE J1756 Specifications
Our 3M™ Adhesive 300MP (PDF, 11 Kb) is a high-tack acrylic adhesive system featuring high initial adhesion and good humidity, water, solvent, chemical and UV resistance. The formulation gives 3M™ Adhesive Transfer Tape 6035PC a consistently strong bond up to 250°F (221°C). This particular low fogging adhesive tape is tested to SAE J1756 specifications for use in automotive interiors.
Heavy Liner Provides Ease of Handling and Lay-Flat Properties
A 83 lb. polycoated kraft paper liner is moisture stable and provides lay-flat properties that makes this tape ideal for flat-bed die-cutting operations. The thicker caliper of the backing is also helpful for kiss cutting and steel rule die cutting.
Understanding Adhesive Transfer Tapes
3M adhesive transfer tapes are pressure sensitive adhesives coated on a release liner, without a scrim or carrier. These adhesive tapes are more conformable than double coated adhesive tapes for applications with textured or irregular surfaces. For application, the tape is positioned, adhesive side down, to a surface and the liner is removed, exposing the backside of the adhesive to the joining surface.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.
Click here for more information on 3M Design Solutions. (PDF, 20 Mb)
Pressure Sensitive Adhesive properties are frequency and temperature sensitive. 3M has developed Material Data Cards (MDCs) for common 3M PSAs for use with many commercially available FEA software applications. Learn more.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.