1. United States
  2. All 3M Products
  3. Tapes
  4. Sealing Tapes
  5. 3M™ Weatherban™ Ribbon Sealant PF 5422

3M™ Weatherban™ Ribbon Sealant PF 5422

  • Options available
  • | Select product options for IDs.

Thread-reinforced butyl tape

Repositionable without cleanup

Weather resistant

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 96KB)Safety Data Sheet (PDF, 0B)
Ask a 3M Expert

Details

Highlights
  • Thread-reinforced butyl tape
  • Repositionable without cleanup
  • Weather resistant
  • Maintains tack at temperatures as low as 40°F / 5°C, permitting application in unheated areas
  • Stays in position on vertical or overhead surfaces
  • May be positioned side by side to achieve varying widths
  • Solvent free

3M™ Weatherban™ Ribbon Sealant PF 5422 is a thread reinforced preformed butyl rubber sealant tape. It offers a watertight, gasket-like seal around window and door frames and glass bedding applications. This sealant can also act as a metal seam sealer in overlap seams, building panels, rain gutters, and can be used in conjunction with mechanical fasteners.

Ribbon Sealant PF 5422
Sealant is easily applied by hand
Offers a Flexible Bonding and Sealing Solution
3M™ Weatherban™ Ribbon Sealant PF 5422 offers outstanding resistance to weathering, and develops good adhesion to glass, metal, and most other surfaces. It is often used for applications demanding high tack, aggressive adhesion, weather resistance and flexibility. Protective liner and sealant are different widths for easy release, with no special equipment required for application. Sealant stays in position on vertical or overhead surfaces, and is repositionable during application. It builds aggressive adhesion over time.

Recommended Applications
  • Used for applications demanding high tack, aggressive adhesion, weather resistance and flexibility

Easily Applied by Hand
Prior to applying 3M™ Weatherban™ Ribbon Sealant PF 5422 (PDF, 16.93 Kb), the surface should be free from dust, dirt, grease or other contamination. The temperature of the sealant and surfaces to be bonded should be 40°F / 5°C or above. PF 5422 comes in roll form on a liner. Simply lay or press the sealant in place, remove and discard the liner. The sealant may be positioned side by side to achieve varying widths.

Cleanup can be accomplished with a solvent such as 3M™ Scotch-Grip™ Solvent No. 2 or 3M™ Citrus Base Industrial Cleaner (sold separately).

Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

Typical properties

Resources

Reviews

Ask a 3M Expert

Close  
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.