3M™ Splicing Tape 253

  • Options available
  • | Select product options for IDs.

Special silicone adhesive exhibits good "web-grab" and peel adhesion to many silicone treated materials

Silicone-coated backing enables the splice to be functional

Liner helps ensure roll quality, ease of unwind and protection of adhesive against contamination until splice is ready to be made

View more details
Frequently viewed resources
PDF (1) Copy 26Tech Data Sheet (PDF, 10KB)

Details

Highlights
  • Special silicone adhesive exhibits good "web-grab" and peel adhesion to many silicone treated materials
  • Silicone-coated backing enables the splice to be functional
  • Liner helps ensure roll quality, ease of unwind and protection of adhesive against contamination until splice is ready to be made
  • Materials release from the tape backing as easily as from the material itself for clean removal of tape and adhesive

3M™ Splicing Tape 253 is a single-coated paper tape with a modified poly liner implemented on the face side of the tape to help ensure roll quality and provide protection against contamination. This tape is ideal for silicone and plastic based material splicing and butt splicing applications.

3M™ Splicing Tape 253 is a 4.6 mil, tan, single-coated paper tape with a modified poly liner.
Liner helps ensure roll quality, ease of unwind and protection of adhesive against contamination
Solutions for Silicone Splicing Applications
3M™ Splicing Tape 253 is a 4.6 mil, tan, single-coated paper tape with a modified poly liner. The tape itself is a treated flatstock paper backing coated with a silicone adhesive. We've implemented a modified poly liner on the face side of the tape to help ensure roll quality and provide protection for the adhesive against contamination until the splice is ready to be made. The release liner also helps create an easy and controlled unwind for easy manipulation and deployment of the tape. 3M™ Splicing Tape 253 is designed to perform at temperatures up to 150°F/66°C.

Recommended Applications
  • Butt splicing many paper and plastic based materials
  • Splicing many silicone treated materials

Clean Application and Removal with Silicone
The tape features an adhesive that is long-aging to allow the tape to remain adhered and flexible. Silicone adhesives stick well to difficult surfaces such as silicone liners and silicone coated surfaces. When finished this tape removes cleanly and easily to eliminate time consuming cleaning processes. This tape will remove cleanly from a variety of substrates.

Typical properties

Resources

Reviews

Ask a 3M Expert

Ask a 3M Expert

Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.